JOHNSON CONTROLS F-700-9 F-700-9 TEE 1/4 COMPRESSION

1/4" COMPRESSION TEE

F-700-9 - 1/4" COMPRESSION Tee

Our F-700-9 1/4" compression tee features a 1/4" male pipe thread x male pipe thread, a 1/4" male pipe thread x female pipe thread and a 3/8"-18 female NPT fitting. It is manufactured from 300 series Stainless Steel for corrosion resistance and has a pressure rating of 150 psi at 80°F. It is compatible with all 1/4" OD x 1/4" OD fittings and tubing.

The F-700-9 F-700-9 1/4" compression tee has gold brazed copper alloy fittings.

JOHNSON CONTROLS F-700-9 F-700-9 TEE 1/4 COMPRESSION

The F-700-9 is a 1/4" compression tee made of stainless steel with an epoxy coating and zinc dichromate finish. It has a 1/4" inlet and outlet and comes with threaded rings and washers.

One type of compression tee will work with any type of tubing to form a single connection assembly. The tee must be installed in the straight through position when the number 2 tube connects to it.

The F-700 Series Tee compression fittings with barbs provide a leakproof, fixed connection for special application piping. These stainless steel fittings ensure consistent performance, with consistent smooth transitions and excellent NPT threads. The STO/FIT system guarantees rapid installation and easy maintenance. These fittings are manufactured to ASME, ANSI and CSA standards.

Industrial direct duct accessories can save money on ductwork installations where multiple coils need to connect to the same run of flex duct. These T series tees are available in 90, 120, 135, 160 and 180 degree configurations, made of galvanized duct material with zinc-coated mounting brackets. They are designed to connect two perpendicular runs of 1/4" flex duct.

Johnson Controls F-700 Series TEE compressors incorporate a variety of standard features to help assure longer, efficient service. End flange lubricators and Delrin valves supply oil to prevent dry running and extend bearing life. Composite compressor wheels reduce vibration and prolong wheel life, while breaker-type pilot controls supplied with pilot air pressure safety pilot systems prevent pilot gas from entering the compressor's pilot safety pilot valve. Dry ball checks are provided on all relief valves for positive relief, consistent operation, and are adjustable with thru-bolt type handles for easy access.

Saves freight by utilizing a single hydraulic hose for both hydraulic cargions.

Heat Pump Thermostat for use in a variety of applications with single stage high and low side expansion valves.

F-700-9 is a piping system that works on both hot and cold water systems, distributing hot or cold water as required. It does not include a heat tracing system as there are very few applications where an energy conserving heat tracing system is needed, and those require special tools for installation. The F-700-9 system is usually used as a replacement for gravity type systems or to provide a change of direction of flow.