1/4" X 1/4" X 5/32" BARB TEE Johnson Controls F-700-84

1/4" X 1/4" X 5/32" BARB TEE

Our 1/4" X 1/4" X 5/32" BARB TEE is made to last and dependable for a variety of your water-related needs. Made to be corrosion and rust resistant, there is no need to worry about the materials not standing up to the job.

This 1/4" X 1/4" X 5/32" BARB TEE is packed in Johnson Control's F-700-84 4.25 Gallons Liquid Line Filter with Aluminum End Caps . The filter comes in 7,10,17.5,23 and 28 micron

The F-700-84 series 1/4" X 1/4" X 5/32" BARB TEE is available in brass. It is designed for use as a vacuum breaker for steam and condensate lines.

The Johnson Controls F-700-84 is a 1/4" x 1/4" x 5/32" Barb Tee. Use it in the Johnson Controls F-900 series valves, or under the Johnson Controls E-2000 series single cylinder actuators to provide flow paths for refrigerant.

This Barb Tee is designed to connect 1/4 inch tubing to a 5/32 inch tubing

This F-700-84 barb tee is designed for 1/4" or 5/32" Sch. 40, slip x slip polyethylene tubing, and allows the tubing to run outside instead of inside the LDPE casing. The barb tee includes one outlet tube which has an inside diameter of 3/16" and connects to 1/4" or 5/32" tubing for your application. This barb tee will help connect your additional lines into this unit.

The F-700-84 barb tee is used to connect 1/4" polyethylene tubing to the SS-1JPA series purge adapter under conditions of elevated temperatures or pressures.

A Johnson Controls manufacturing partner has provided this part drawing, showing the barbed tee fitting.

This TEE is made of high quality material, durable used in plumbing.

With over a year of experience in this industry, we can provide you finest products and excellent service. We are looking forward to cooperating with you!

For use in a 90 degree elbow of a sump pump system to extend the actuator.

Tube fittings, also called tee's, allow fluid to flow from a single line to a single line or from a single line to a multiple set of lines. The use of tube fittings will ensure a safe operating range for fluid temperatures and pressures which means your equipment will operate at peak condition. Tube fittings are rated by the American Society for Testing and Materials as pressure-temperature ratings as well as pipe sizes.