HOSHIZAKI F13107 FAN MOTOR KIT 115V, W/CA PACITOR

FAN MOTOR KIT 115V, W/CA PACITOR

This fan motor kit is used to replace a bad or defective fan motor assembly on the following Hoshizaki models: F13107 FAN MOTOR KIT 115V, W/CA PACITOR

This Hoshizaki AMT FAN MOTOR KIT 115V, W/CA PACITOR * includes a 3500 RPM 120 Volt 0.75HP (MAX) 1725/1425 Rotation CFM motor, 0.5" pulley with belt, terminal block and bracket assembly. Backed by a one-year warranty ** .

Fan Motor Kit 115V, w/CA PACITOR Our heaters operate on 60Hz current. If you have a 50 or 480 Hz electrical system, you will need to buy parts IX-9001 (bobbin and motor) and X-1838 (shell and coil) For Use with the Following Models: FS1022B, FS1024B, FS1028B, FS1030B, ST1011B, ST1013B

This Hoshizaki fan motor kit 115v, w/CA Pacitor is designed for use with a wide-range of Hoshizaki Ice Machines. This motor has a better design, which improves energy efficiency. When replacing an older motor from the same model ice machine, this new version is guaranteed to fit.

You must already have an assembly to replace. If you're able to take apart your old one and see what the attachment looks like, then it may be possible.(ie: a round pulley on the motor shaft) We don't provide the mounting bracket that attaches to your ceiling; you just need a little wood and some nails and you can make one or get one at any hardware store for cheap. The Hoshizaki F13107 Fan Motor Kit 115V, W/CA PACIT

This Hoshizaki F13107 Fan Motor Kit 115V, with Capacitor and with Compressor Activation Kit, is designed as a direct replacement for the following Hoshizaki units: Type F-PR110208C, Model Number: F13107-TNS12H, Type F-PR110208D, Model Number: F13107-TNS12H. The fan motor kit includes a new 115V motor (51A), a new capacitor and a

Hoshizaki's replacement fan motor assembly kit is designed to replace old worn out or damaged fan motors in your ice machine. The assembly kit is for use in Hoshizaki and any other brand of 115 volt, 1/8 horse power, 36 and 48 inch icemakers. The fan motor will fit inside the evaporator cover door. It has a cylindrical shaft attached to a mounting bracket that attaches to the evaporator cover door. Attached to the mounting bracket is the