FASCO B187599 50752-D500 Centrifugal Blower with Sleeve Bearing, 3,100 rpm, 115V, 60Hz, 1.1 amps

Fasco Centrifugal Blower, 50752D500, 115 Volts 3100 RPM

Fasco 50752D500 Centrifugal Blower. 115V 60Hz, 1.1 Amps, 3100 RPM, Class F insulation (50%).

For some air tools, a centrifugal blower is more suitable. The FASCO B187599 50752D500 115 volts centrifugal blower is the perfect choice for most air tool applications. Its 1.1 amp motor has 115 volts, 3100 max revolutions per minute and 54 watts with a speed of 5500 to 3500 revolutions per minute.

The Fasco B187599 50752D500 Centrifugal Blower with Sleeve Bearing is a high-quality 115 volt, 60Hz product designed for residential and commercial application. It has a sleeve bearing and variable speed control that allows the user to choose from multiple speed settings. The Blower has an adjustable belt guard that makes it durable and easy to use. It features a cast aluminum construction, weighs 33 pounds and has 1.1Amp power consumption. The product measures 15

The 50752D500 5/8” centrifugal blower series are single phase, 115 volt units rated at 3100 RPM. This series has an updated housing for higher efficiency. Features include a 48” shaft length, a NEMA 1-15P plug, and a CE rating. For air flows of 1400 to 2400 CFM at 100 PSI, the centrifugal blower is an excellent selection.

You were looking for a centrifugal blower with an operating speed of 3150 rpm, which was not the most efficient, but would suffice. What you found was the FASCO 50752D500, 3100 rpm motor - which is by no means an acceptable substitute. Please refer to the attached specification sheet for the exact technical information you requested.

FASCO B187599 50752-D500 Centrifugal Blower is one of most popular axial blowers in its class. It has an adjustable temperature limit switch, a blower housing made of aluminum, and a direct drive. This particular centrifugal blower is horizontal mount with an external brush/commutator motor

The Fasco Centrifugal Blower is designed for general lab and industrial applications. This unit features a sleeve bearing, 115V/60Hz, 3100RPM, 1.1Amp motor. Additionally this unit has a 6'' inner diameter, 22.2mm outer diameter and over all length of 6.68''. The wall mount design allows for control of airflow with minimal change in air direction.