FLANGE WIZARD 496-ABG750 ANGLE BURNING GUIDE OFF/ON MAGNET

ANGLE BURNING GUIDE OFF/ON MAGNET

The Flange Wizard Angle Burning Guide is a 496-ABG750 angle burning guide that can be used on/off magnet.

The FLANGE WIZARD 496-ABG750 Angle Burning Guide with magnet holds up to four pieces of metal flange to a surface from 1/8" to 2 inches thick. The unique holding device has a built-in mechanism that rotates into position when the handle is depressed and can be activated remotely by means of an attached wired switch (not included) or on/off magnet.

Our Flange Wizard Angle Burning Guide combines a traditional flange guide with an ON/OFF/ON Tool Magnet which can be used to hold and burn off several flanges on your flange assembly. On one end of the guide is a standard straight cutting tip for burning and a serrated cutting tip for also cutting the bottom of the flange. On the other end is the magnet which can be moved into an ON position, keeping a standard angle square in place. This will assist you in placing up to fourteen different flanges, which then are ready to be welded onto your project together as one one piece. If

The Welding Wizards 496 Flange Wizard is a perfect addition to any welder that needs to set their work piece up at an angle. The handy Angle Burning Guide flips easily from one position to another and the magnet allows a firm hold against jobs where you need more control, such as welding with DCEP machines.

The FLANGE WIZARD 496-ABG750 Angle Burning Guide lets you pinpoint the exact location you need to seal during soldering operations. The dial on the side of the guide allows for setting from 0-90° in 15° increments, and locks in place.

The Flange Wizard angle burning guide for fuel pipe is designed to direct the user in cutting the pipe at 90 degree. The inside of its clear plastic cover is coated with white and red stripes, which meet at 90 degree to show the user where to cut. The flange angle measuring guide shows on the back of the clear plastic cover.

The Flange Wizard 496-ABG750 makes easy work of finding the right angle for your torch while protecting it from the elements. A simple, tool-less adjustable device with a powerful on/off magnet allows the burn angle to be set at any angle (0 - 90 degrees) to match the contour of your project. Never hunt for a place to prop your torch again!