FRYMASTER F10500 Gas Valve - 7000BMVR, Na t., 1/2 inch X 1/2 inch

Gas Valve - 7000BMVR, Na t., 1/2 inch X 1/2 inch

The FRYMASTER F10500 Gas Valve - 7000BMVR, Na t., 1/2 inch X 1/2 inch is a replacement part which is designed for use with any of the FRYMASTER open ranges or griddles.

The Frymaster 7000BMVR is a replacement gas valve designed for select Turbo Air fryers. It features a 1/2 inch x 1/2 inch gas port and the unique patented No-Lift Safety Valve that eliminates gas flow if unit is dropped or tilted accidentally.

The F10500 7500 BTU Natural Gas Frymaster Gas Valve is designed for use with most fryers with a 1/2 inch gas connection. The 7000B series gas valves increase and decrease the natural gas flow to the burner assembly. The 7000BMVR valve is made out of nickel, and has a temperature range of 0 degrees Fahrenheit to 250 degrees Fahrenheit.

The Model 7000BMVR Series Gas Valve is designed for use on gas-fired infrared Fryers. The Model 7000BMVR is a normally closed pilot type valve. This two-way pilot valve is used in combination with a temperature controller and flow switch to provide automatic operation of the infrared fryer.

The F10500 is a NAT gas valve with the 1/2 inch male NPT inlet thread and the 1/2 inch male NPT outlet thread.

The F10500 Gas Valve is designed to fit a 1/2 inch gas line hose and to be installed in a tank that has a natural gas valve. The valve is designed with a stainless steel stem, hex fitting nut, and a manual lever. Installation of the valve requires a wrench, hose and torch.

Put the power to control your restaurant's fryers in one convenient place. Our easy-to-use gas valves can be installed on virtually any brand of fryer (even new ones), so you can monitor levels, set time limits and automatically shut off fryers when they run low on oil. Best of all, these self-contained units don't require replacement parts, wiring or additional equipment, making them easy to install and maintain.