Functional Devices PSH300A -LVC | FDI | Enclosed low voltage compartment 100VAx3 120-480 to 24Vac UL Class 2 power supp

120/240V 300VA POWER SUPPLY

With the PSH300A, Simplex makes a power supply that will help you stay within code, in control and up to date. It is a solidly built, wall-mountable power supply intended for use whenever 120/240 volts AC is needed. This unit converts 120/240 volt nominal input to 24 volts (typical) or 240 volts (max). It is UL Listed as a stand alone unit.

The PSH300A-LV/C is a 300VA power supply with enclosed low voltage compartment. The power supply consists of an AC input, a DC output and an adjustable Output Voltage Selector (VOLT) control located on the front panel. The VOLT control requires an external linear taper 1w 2w 3w or 5w pot - refer to the Technical Specifications section below for details.

The PSH300A is a 300VA, AC isolated, low voltage DC converter with a built-in NEMA 5-15R receptacle and lights. It may be used as a power supply or it may be used to convert from 120/240V AC to 24VDC @ 16 amps. The output is rectified using silicon diodes. The test circuitry includes a diode bridge for detecting an open load and optoisolator for remote sensing of the load. It is available in UL and CE compliant versions. FDI (Frequency dependent Isolation) is used in both versions of the PS

This low voltage power supply is used to drive external resistive loads. A 300VA (0.5kW) low voltage power supply, designed for use in medium to heavy duty industrial applications.

The Functional Devices PSH300A power supply is ideal for smaller industrial electronics and can meet the needs of low voltage control applications up to 120mA per output. This power supply allows you to choose from 3 different output voltages through the sliding switch on the back panel. The power supply uses a 17.5 amp hour (300VA) sealed lead acid battery, which is recharged by an external transformer.

The Functional Devices PSH300A is an enclosed compact power supply with overload, under voltage and over voltage protection. This powerful power supply is designed for situations where heavy loads must be powered by regulated low voltages. The PSH300A has three independent outputs consisting of two 300VA and a 100VA outlet. Each output can be independently set to six different fixed voltages set between 24Vac to 120Vac.

Functional Devices PSH300A-LVC | FDI | Enclosed low voltage compartment 100VAx3 120-480 to 24Vac UL Class 2 power supply backup that delivers immediate AC power when you need it most. Protect your sensitive electrical devices from harmful surges and spikes with the Functional Devices PSH300A-LVC | FDI | Enclosed low voltage compartment 100VAx3 120-480 to 24Vac UL Class 2 power supply.