Functional Devices RIBU1SC | FDI | Enclosed Relay 10Amp SPDT + Override 10-30Vac/dc/120Vac

EnclsdRelay10ampSPDT+override

The Functional Devices RIBU1SC Enclosed Relay 10Amp SPDT + Override 10-30Vac/dc/120Vac and more offer(s) all the best aspects with a wonderful cheap price of 17.99$ which is a bargain. It possess several characteristics including Overwhelmed in Plastic, new, relay type and Voltage 120-240VAC.

The FDI|1008160 Enclosed Relay Switch is a 10 Amp SPDT relay in a plastic enclosure. The contacts of the relay may be used to switch the 120 VAC load either from AC line voltage through the primary side of the relay, or through the control voltage applied to the secondary side of the device. An internal thermal fuse protects against overcurrent. Also, an external switch may be connected in parallel with the device\'s primary side, for example, so that if AC line current is present then SPST switch opens and stops (and prevents) heating or cooling operation, but as soon as AC

The RIBU1SC Enclosed Relay is a 10 Amp Relay with SPDT, which offers you various wiring applications to control temperature. The SPDT relay is used in either NC (Normally Closed) or NO (Normally Open) contact.

The RIMU1SC is a functional relay unit. It has 10 Amp SPDT relay, Overload alarm and Override function. This relay provides a short circuit protection to control circuit boards, solenoid valves, etc. The RIMU1SC is enclosed type with built in mounting brackets for easy installation. This relay units also protect against improper wiring and provides an accurate and easy-to-read status indication that confirms proper operation of the device protecting your valuable equipment.

The FDI RIBU1SC | FDI is a factory-sealed Relay (spdt) with an Override function, enclosed in a small housing. It can be used to switch welding machines, machinery, etc.

The RIBU1SC is a small single pole snap-in relay protection device that offers cost effective protection and flexible mounting options. Other features include Constant voltage and current limiting. Directional control relaying with override capability for added versatility. The device is rated for 10A at 120/240Vac or 10/30VDC SELV for cable fusing applications up to 1.5 in diameter.

Our enclosed relay's design allows for a safer way to control your motorized project. With a SP3T switch (single pole, 3-way, and trutcheon), you get an easy to use push button on the top that allows you to turn the relay on or off. This is a very safe and easy way to add power switching circuitry to your DIY project.