Functional Devices RIBW24B-EN3 | FDI | EnOcean 902 Mhz Enclosed Relay 20Amp 24Vac 2-Way Wireless Dry-Cont. Input

902MHZ RELAY 20AMP 24VAC/DC 2W

Designed for use with FDI's range of 902 MHz wallmount sensors and controllers. The RIBW24B-EN3 relay features an output of 20A at 24VAC/DC 2W.

FDI ENOcean W24B-EN3 Board with 902 Mhz Enclosed Relay - 20Amp @ 24VDC/AC Control voltage: 24VDC/AC, Power: 20A continuous Duty Cycle: 100%, Output: N.O + N.O, Half wave rectifier: Yes, Function: 2 way wireless dry contact input, Frequency: 902Mhz

The RDW24B-EN3 is an EnOcean wireless relay with a DC supply voltage of 24Vac/DC, with an input interface type of screw terminals. The communication protocol of this device is 902MHz and it takes a maximum current draw of 20A.

The Functional Devices 902MHz Product Line will enable your facility or building to perform critical functions while you are at home, on vacation or away from the office. Relay devices control large industrial heating and cooling systems, HVAC, flashers and pumps.

The FDI EnOcean 902 Mhz relay module is used for simple and cost effective wireless control of heating, air conditioning, humidification activation, water pumping activation, etc without the need for expensive installation or additional wiring. The FDI sensor solution enables wireless detection from switches, temperature and humidity sensors etc.

FDI RIBW24B-EN3 , This EnOcean wireless Relay automatically actives when a dry contact sends a signal from its input terminal. Activation informs the central processor which in turn determines action(s) and sends an information to the output terminal.

Wireless transmitters and receivers have an effective range of 30 metres. Wireless dry-contact devices can be used with devices that require a logic switch, such as relays, timers or measuring devices. Contact verification (after release) is also possible through remote reset and confirmation. All devices are enclosed and waterproof to IP65 in compliance with the CE directive for use in Zone 2.