GEFEN INC EXT-RS232 SERIAL EXTENDER - WIRED - EXTERNAL - 1000 FT

SERIAL EXTENDER - WIRED - EXTERNAL - 1000 FT

GEFEN INC EXT-RS232 SERIAL EXTENDER - WIRED - EXTERNAL - 1000 FT

GEFEN, INC. EXTERNAL SERIAL EXTENDER (EXT-RS232) - WIRED - EXTERNAL - 1000 FT (305 METERS)

The EXT-RS232 Serial Extender - Wired (EXT-RS232R) is a RS232 serial extension device. It features an impressive 1000 feet of 18 AWG wire cable allowing you to seamlessly connect your RS232 devices to a remote location. The included RJ11F to RJ45 Modular Adapter allows you to extend the flexibility of the device by switching the wire cable with an Ethernet cable.

GEFEN's EXTERNAL RS232 EXTENDER - 1000 FT will let you extend your RS232 serial connection an additional 1000 ft away from your host. It can be connected between a host computer and up to 3 remote devices. The EXT-RS232 serial extender is a high performance device with baud rates up to 921,600 (9600 for each direction).

The ECC-EX1000-W is a RS232/422/485 point to point isolation extender. This extendes Serial over IP up to 1000ft with no external power supply required.

The GEFEN EXT-RS232 Serial Extender allows you to extend the RS232 serial signal up to 1000 ft away from the host computer using CAT5e cable. This is achieved by establishing a cable connection between the RS-232 port on the host computer and a RJ45 Female port on the extender. The RJ45 Female Port is connected to an RJ45 Male port on an extension device.

The EXT-RS232 Serial Extender (External) (RJ-45 to DB-9) extends the RS-232 serial port connection of a computer, printer, or other equipment up to 1,000 feet using 2 Cat 5e UTP cables (not included). This extension solution is pin and protocol compatible with standard RJ-45 termination. Power can be provided by one of the connected stations via the DC power jack. The extender supports full modem speeds (9600/19200 bps).