×
Free Shipping @ Any Price
Best Price GUARANTEE
30 days money back

Danze Kitchen Faucet Repair

Posted by Amos on Feb 6th 2022

Danze Kitchen Faucet Repair

Photo from Danze

Danze faucets are very well-known, and are used in kitchens, bathrooms, pantries, utility rooms, bars, and more. Danze carries a wide range of faucets, such as pull-out spout kitchen faucets, two-handle kitchen faucets, pantry & utility faucets, single-handle bathroom faucets and so much more.

Faucets can leak over time. Replace worn-out internal parts with new ones, and make sure the faucet isn't leaking. You may also want to check the faucet hose or faucet sprayer.

When Do You Need to Repair Your Danze Kitchen Faucet?

First, check where the leak is coming from. If it's coming from the inside, remove the aerator and clean it thoroughly. Replace it. If the leak is coming through the wall, then it might be easier to just replace the whole unit.

How to Repair Your Danze Kitchen Faucet

There are two types of faucets. The pull-out faucet and the fixed faucet. The pull-out faucet is where the entire faucet assembly can be pulled out of the countertop. A fixed faucet cannot be removed without disassembling the sink.

The advantage of pull-out faucets is that they allow more space underneath the sink. This allows for greater access to pipes and drains.

How Do You Install a Pull-Out Faucet?

  1. First, turn off all power sources to the area. Remove the existing faucet assembly by unscrewing the mounting screws. Next, lift the faucet and gently slide it away from the sink. Make sure not to drop any screws or tools as you move them.
  2. Once everything is clear, start installing the new faucet. Place the faucet into the hole of the countertop. Use a level to make sure it is even.
  3. Next, screw the faucet back down. Finally, turn on the power source and test the faucet to see if it works properly.

How To Stop Your Kitchen Sink Faucet From Dripping

If your kitchen faucet is dripping, make sure all the drain holes are clear. Next, turn off the water supply valve and open up the sink drain hole so any remaining water drains away. Finally, if the problem persists, call a plumber.

Replacement Parts for the Danze Kitchen Faucet

You’ll find helpful information about replacing parts of your faucet by simply knowing the model and part numbers.

Danze has put a brand name on faucets to make them easier to identify. There are many types of kitchen faucets. Pull-out spouts are used in sinks and tubs. Pull-out pot fillers are used for pots and pans.

Pull-out bathroom faucets are used in showers and baths. Pull-out faucets are also available in shower stalls and bathtubs.

Pull-out faucet handles are usually made of brass, chrome, or stainless steel. Pull-out faucet top handles are usually made of brass or chrome. Pull-out faucet lids are usually made of brass. Pull-out bathroom faucet scales are usually made of brass and chrome.

Pull-out bathroom faucets with valve handles are usually made of nickel, silver or brass. The valves are usually made of brass with chrome trim. The bathroom faucets are usually made of brass and may have chrome trim and/or chrome finish. Pull-out faucet top handles are usually made of chrome.

How To Install a Cartridge For the Danze Kitchen Faucet-Single Handle

Replace the cartridge by turning off the water supply valve to the faucet. Then turn the faucet handle clockwise until the handle touches the backstop. Turn on the faucet handle again. Place a bucket on the floor below the faucet.

Also, check if your faucet cartridge is broken. When water drips from the spout, or when the water enters cold water outlets, there is a problem with the cartridge.

After the water is turned off, remove the old cartridge. Then remove the trim cap by screwing it counterclockwise. Next, use a pair of adjustable pliers to remove the lock nut. Finally, hold the stem of the cartridge while pulling it up until the cartridge is fully installed.

A leaky faucet could be caused by many things. Your faucet may need new seals or O-rings. You might also have an old worn-out washer inside your faucet.

How Much Does a Danze Kitchen Faucet Cost?

The price will vary depending on what type of faucet you have, but here are some approximated prices:

Pull Out Spout Kitchen Faucet - $494.90

Single Handle Bathroom Faucet - $136.91

Single Handle Pantry Faucet - $60-$65

Double Handle Bathroom Faucets - $648.20

Safety Tips

As you go on to replace your kitchen faucet here are a few safety tips to ensure everything is smooth.

  1. Do not use it if there are any cracks or deformations.
  2. Cover your drain to avoid losing any of the faucet parts.
  3. The fittings should be installed by a licensed plumber if you experience trouble doing it yourself.
  4. Always wear a pair of gloves to prevent your hands from getting injured.

Conclusion
Fixing your Danze faucet should be quite simple with the help of this guide. If you need any more help, you can always contact a professional.

We carry high-quality home products from Danze! Find what you need here!

to top