Here is a step-by-step guide on how to remove an American Standard toilet seat. This guide will cover removing and installing a toilet seat.

1. Open the bolt gaps—this should help you gain access to the seat fasteners, located in the same area as the seat hinges. Open the plastic covers for the bolts by prying them open with your finger or a screwdriver.

2. On the threaded end of the bolts, there are mounting nuts that are screwed on. Grip the nuts using a pair of pliers. To prevent the plastic ones from breaking, apply very light pressure. Unscrew the bolts using a screwdriver. Set the pieces aside in a safe place.

3. Now, simply remove the toilet seat.

How to install a bottom mount American Standard toilet seat

1. Position the toilet seat over the holes on the toilet bowl, aligning with the hinges.
   
   
2. Carefully slip the bolt through the bolt holes of the bowl.
   
   
3. Thread the winged plastic nuts on the bolts.
   
   
4. Tighten and secure the bolts in place using a screwdriver.
   
   
5. Push the American Standard hinge covers down, in order to secure the toilet seat in place.
   

How to install a top mount American Standard toilet seat

1. To easily install the black rubber plugs, insert the steel bolts and make sure to capture a few threads. Wet the lower part with some soapy water for best results.
   
   
2. Push the flange so that only the bulb goes through and the plug does not fall through.
   
   
3. Once the plug is in place, unscrew the bolts and set them aside.
   
   
4. When you have ensured that the toilet seat is properly aligned with the front-most edge of the toilet bowl, carefully slip the bolt through the bolt holes, as well as the washer.
   
   
5. Use a screwdriver to tighten and secure the bolts in place.
   
   
6. Push the American Standard hinge covers down, in order to secure the toilet seat in place.
   
   

How to care and clean for your American Standard toilet seat

Taking care and cleaning your American Standard toilet seat will keep them in good shape for a longer time.

• Use mildly soapy water to scrub your toilet seat, and rinse it with clean water thoroughly. Dry the toilet seat with a dry piece of cloth.
  
  
• Avoid cleaning using detergents, disinfectants and harsh cleaning products packed inside aerosol cans. These cleaners damage the toilet seat’s finish in the long run.
  
  
• Make sure the bolts are regularly tightened and secured.
  
  

American Standard is a leading plumbing and high-performing home products brand. Find more American Standard products here!