Honda 18350-Z5T-800 Honda Arrester, Spark 18350Z5T800 Made by Honda

ARRESTER, SPARK

The ARRESTER, Spark is an arrester of the special type used for operating spark discharges on the lines. By interrupting in a safe manner a heavy swift current of high tension that would otherwise be destructive to insulation.

Our Honda Spark 18350 Z5T-800 Arrester, Spark comes complete with a black fitted rubber boot to protect the positive connection during storage or transit. The Arrester has been developed to prevent potentially dangerous sparking associated with re-entering an engine room after discharge of static electricity when, for example, leaving a work boat.

The Honda Arrester (18350-Z5T-800) is a spark plug. It has a silicone face. It has solid cup corset.

NEW 18350Z5T-800 EARTH BONDED FUSIBLE ARRESTER. 5 kA Tol. 800V. 10 x 23 x 30MM.

The Spark 18350Z5T800 series is an arrester that features robust built-in thermal overload protection, and is designed to withstand high voltage of more than 3100 VAC including transient voltages of the circuit breaker insulation. This enables it to interrupt even extremely large surge currents .

This Honda Arrester is a good quality product that works well. It was easy to use and the price is reasonable. I would recommend it to anyone who needs an arrester for their motorcycle.

The arrester consists of two categories: the heavy current arrester and the light current arrester. When the heavy current arrester is used, the high impedance caused by power leakage must be large enough to protect apparatus against the adverse effect of high-intensity currents. In general, therefore, it is suitable to use the heavy-current type for line sections where power leakage is expected to be large. When the light current arrester is used, the amount of resistance to be inserted into the circuit should be so selected as not to cause a great burden on either the equipment which handles leakage current or that