Honeywell 108153 RRD8 "8"" RetrofitRoundDamper 24v"

8" RETROFIT ROUND DAMPER, SLIDES INTO 8" RIGID ROU

Add the perfect finishing touches with a retrofit round damper to your existing installation. A retrofit round damper is not necessarily an elegant solution, but it works very well, and during the life of the building you will only need to purchase this once. This allows you to take advantage of the most economical solution in retrofitting your home, while still adding value. The 8" Retrofit Round Damper slides into an 8" Rigid Roof Duct.

The 8" Retrofit Round Damper slides into a standard 8" cut-out. It can be mounted vertically or horizontally, has adjustable interior baffles, and comes with a twist off removable trim ring. Warranty Information: 5 Years. Recommended for residential applications only.

This round damper fits Rigid, Reliance, and NRC venting systems. It is used to close or limit air flow in a vent system. It can also be used to convert a non-vented fireplace into a vented fireplace by attaching the damper to an outside opening and then installing the flue system; it is 8" in diameter. The Retrofit Round Damper has 6" of wiggle room within the annular ring, which provides additional air capacity for upd

Retrofit Round Dampers are specially designed for 8" Round Ducts. The Retrofit Round Damper safely contains the noise, heat and cold air infiltration. Retrofit Round Dampers are available in multiple sizes and finishes for 24v or 24/7 systems. Honeywell RigidRound is the quietest damper in our lineup, with the least moving parts. DOWNLOAD BROCHURE >

Non-Radial 24 Volt Condenser Fan Retrofit Damper. This damper is designed as a direct replacement for 8" round rigid ductwork to be used in 24 volt retrofit applications. It has an interior diameter of 8.5", and the exterior diameter is 14.75". Please note that this product will not include the mounting screws .

Retrofit Round Damper – 24VThe Snap-Hook Retractable plastic damper slides into the 8 Round Open Vapor Barrier giving you a perfect fit every time. Easily connected to 24 volt system via plug in terminals, very little effort required to set up. Diagrams are included, please see below for installation instructions.

Retrofit Round Dampers are available for many common ducting sizes, for all major brands of Furance, Boilers, and Water Heaters. All Retrofit Round Dampers can be installed using existing ducting or new flexible ducting. These dampers will fit directly in the Old Style round Return Air duct run and work perfectly with all manufacturers Return Air Systems. The Retrofit Round Damper is a direct replacement for the older style damper such as FBT 1/4"