Honeywell ZD6X6TZ Parallel Blade Damper T86265

6L X 6H Parallel 2pos24v S/R

The Honeywell ZD6X6TZ is a 6"L X 6"H Three position, 2 position, single range dampers. It is designed for use with 16GA ductwork with 24V H/V Solenoid and has a 1 3/4" x 6" Flange Discharge. This damper uses a parallel blade motor and features an adjustable shut down feature to allow the fan to remain energized when thermal cutout contacts are open

The ZD6X6TZ is a 2 position, 24 VAC air damper with wax resistive element for wiring through the damper without conduit. The T86265 is a six volt (parallel) motorized damper in a twin pack for controllable ventilation of spaces up to 1300 square feet per single unit.

Honeywell ZD6X6TZ Parallel Blade Damper T86265

The Honeywell ZD6X6TZ 24V DC Fan Motor is designed for commercial comfort applications. The DSC motor can be used for fan, blower, and duct exhaust applications. This motor can run both clockwise, as well as counter-clockwise depending upon which way the wires are connected and it will run in reverse if the direction wire is installed.

Parallel Blade Damper with two positions, Off and On indicating, Helical wound, high temperature fiberglass-insulated blades for the widest comfortable range of airflow, Operating temperature range: plus/minus 750F (427C).

The D6X6-TZ Series industrial heavy duty, high temperature, single speed, and variable air volume control dampers are designed for general service in HVAC&R equipment. The damper uses a parallel blade mechanism with a balance-type actuator that is standardized for the 5-24 volt dc range.

The Parallel blade damper is a high temperature actuator that is activated by an external power source (see below for wiring) and has two 24 volt coils. A variable force spring which can be seen in the photo below contains an inner wire with multiple turns of spring wire that are connected in parallel. The tension of the outer spring is balanced using the inner wire thus providing proportional air movement throughout the entire stroke.