24V NONSPRING RETURN ACTUATOR WITH TAPPED SHAFT &
This HONEYWELL MOTOR MODUTROL IV 24V NONSPRING RETURN ACTUATOR, SERIES: M9484F1031 is 2 Switch, 150 lb. Non-Sprin Return Actuator With Tapped Shaft & Bearing. This part has been validated to work with the assembly including multiples of this part and model. It was designed to hold components that are of substantial weight to provide long life and zero failures while operating. This actuator is perfect for any application that calls for 24V NO/NC SNAP ACTION RETURN ACTUATOR; NON-SPRING
With this motor, designed for use in ceiling fan/light and appliance applications, you can replace older motors in your home with a more efficient alternative. This high torque 24V non-spring return actuator features a tapped shaft and keyed mounting holes to fit existing housings.
The Honeywell M9484F1031 is a 24 volt Non Spring Actuator with Tapped Shaft and out-of-phase operation. It is capable of operating your garage door up or down from a closed position by use of a Tenex CIOB Interface Board and or a Honeywell GSM3T 3 transmitter or up to 3 Honeywell 2XV transmitters.
This Modutrol IV Series 24 Volt DC motor is non-spring return, suitable for applications requiring a large load torque and high output currents. This product is a two pole thermal protected, with a tapped shaft.
24 VAC/DC 150 lb SPARE PART MODUTROL MOTOR WITH 4.0" (105 mm) DIA X 6.0" (152 mm) LONG RETURN FLANGE
Tin/Lead TAPPERED RETURN TO TIN- LEAD PINS ON 3/8" RING GROOVES
MOTOR, DIRECT DRIVE CONTACTOR, 60 HZ, 3 PH, SINGLE PHASE, 4.4 AMPS, 150 LBS MOTOR TORQUE
Free Shipping
In stock
