Honeywell 3341 VR8300A-4516 UNIVERSAL 24V STANDING PILOT GAS VALVE 30-200000 BTUS INC 210351

VR8300A4516, Honeywell, Inc., 3/4 x 3/4 inch Continuous Pilot Dual Automatic Gas Valve

This Honeywell 30-270000 BTU gas valve is a 3/4 inch continuous pilot dual automatic gas valve. It is used to control the temperature on a gas stove. This valve must be installed on a certified venting system with proper gas pressure and natural or propane gas. This gas valve will allow you to fine tune your flame for utmost heat control and efficiency. The installation of this part should be done by a certified professional, such as one from our expert staff at 800-837-0115.

Honeywell 24V Continuous-Pilot Gas Valve is perfect for building gas burners and gas appliances. The 3/4 inch Dual Automatic Gas Valve is designed to pilot two burners independently or in parallel, is thermally protected and sealed against contamination. It comes equipped with an adjustable orifice for precise pilot flame control."

This gas valve is specially designed for continuous pilot signal installations . It has a compact low profile design for easy mounting. The full square port type supports high gas flow and high performance. The VR8300A4516 has an adjustable orifice setting that allows you to adjust the pilot signal strength.

This VR8300A-4516 Honeywell 30-200000 BTU Single Standing Pilot Gas Valve is a direct replacement for the following:   - Amerisure Gas UC30 (UC30) - Atlas Copco 9721-1565 (9721-1565) - Beckett 0101.14, J012667 in 3/4" NPT socket (J012667) - Cooke 10003, CAS100030171040 in 3/4" NPT socket (CAS100030171040) - Defiant C9S6T1500M in 1/2" NPT socket

Introducing the first, patented standing pilot gas valve with a thermally protected pilot. With this valve, no standing pilot is ever needed. The VR8300A4516 will automatically switch the gas supply on and off to a range of natural or LP gases. This gas valve regulates the flow rate of the gases supplied to its remote device.

The VR8300A-4516 Natural Gas Valve is a two-stage pilot valve with individual stepping for 24 volt natural gas burners. The 2 inch (51 mm) pipe nipple is threaded to NPT, and accommodates 30-2000 BTU burners. This product may be used as a replacement or retrofit of other models in Honeywell's series of VT83 Series Pilots.

The VR8300A-4516 is a 24V gas valve designed for use with H Series and HE Series standing pilot gas furnaces. The three (3) wire connection is a red, white, and green color code. This stand alone gas valve operates in all positions without the need for auxiliary power to operate the automatic gas shutoff or electric strike assembly.