Honeywell DP1030A5014 Deluxe Definite Purpose Contactor, 24 Vac 1 Pole

1pole30A/24Vrelay

HONEYWELL DP1030A5014 DEFINITE PURPOSE CONTACTOR 1 POLE 30A/24V RELAY SPST-NO REMOTE FUSING TYPE SWITCH DELUXE, 240VAC MODIFIED NEMA 12 COVER >>Details

The Honeywell DP1030A5014 is a 1-pole 30 ampere, 24 volt relay. The DP1030A5014 has the features needed by the demanding user including the ability to handle two 24 VAC devices with one relay, and an adjustable time delay to reduce premature device false off due to high inrush currents.

The DP1030A5014 is a single pole 30-amp, 120/240V AC, DELUXE contactor with an adjustable time delay for low amperage loads (motor starters). For example, air blower motors up to 3 HP, hot water circulating pumps up to 8 HP, and electric residential and commercial heating equipment up to 5 HP.

The Honeywell DP1030A5014 is a definite purpose contactor, designed to switch low voltage loads. This relay has a rating of 2 Amps at 240VAC and 1Pole. It features Shutters on coil terminals to reduce arcing, Energy-efficient spring braked air contacts, Unique housing design that allows for four contact position adjustments, Seal tight terminals that are molded into the housing and not held in by screws for a positive terminal lock up, Armature inhibit design stops nuisance tripping under high ambient temperature conditions, and Phenolic base with built-in bolt holes for mounting.

The Honeywell DP1030A5014, 30 amp, UL listed, 1pole contactor is specifically designed for use in applications such as controlling uninterruptible power supply (UPS) batteries and switching higher load currents. The contactor also features terminal block connections to facilitate installation.

Created for consumer, industrial and commercial applications, the Honeywell DP1030A5014 Deluxe Definite Purpose Contactor is an easy-to-install, permanent contactor designed to replace conventional single-pole circuit breakers. With a maximum current rating of 30 Amps at 208/240 Volt AC, it provides convenience by allowing you to replace single-pole circuit breakers with unitized breaker assemblies. This makes it a convenient choice for wiring new and retrofit construction.

Conserve energy and save money with Honeywell's DP1030A5014 Deluxe Definite Purpose Contactor. This durable, compact, mechanical 30-Amp contactor/relay is meant to deliver simple solutions for your electrical needs. The easy-to-read display features a countdown timer that indicates the number of cycles the contactor will perform before it must be reset. Select for applications where current is controlled mechanically, such as automatic valves, machine starts and stops, and other cyclical processes.