Honeywell DP3050A5002 3POLE 50A/24V CONTACTOR 3POLE 50A/24V CONTACTOR

3POLE 50A/24V CONTACTOR

Honeywell™ DP3050A5002 3POLE 50A/24V CONTACTOR Honeywell™ DP3050A5002 is a three phase contactor in rectangular package. Honeywell™ DP3050A5002 can be used in applications such as -Motor Control -HVAC control -Induction Heating Systems

Honeywell's DP3050A5002 3-pole 50A/24V contactors offer a high energy and voltage rating in a NEMA 1 enclosure. Use this contactor with a Honeywell breaker in Photovoltaic (PV), wind turbine generator, and other renewable energy power systems. Each unit comes with an operating current of 30A/5A per pole and features an adjustable delay angle for temperature compensation to 5 ms minimum to 60 ms maximum.

The DP3050A5002 is a 3 Pole 50 A/240 Vac multipole contactor, suitable for use with motors and other large loads. This product features a wide AC line voltage range (180-275V), low power loss, and high repetition rate (up to 65,000 cyclic operations). Combined with the durability to handle a wide operating temperature range (-40 to +80 C,-40 to +160 F), these contactors have become a standard in most industrial control panels.

Combination starters/contactors are the workhorse of small to mid-size motors. Contactors are great for efficient motor starting. This is a 50A contactor with a 24VDC coil, 3X20.5mm mounting holes, and it has a 72-76VDC auxiliary contact input terminals (call if you need this voltage in other sizes). The 3 pole is a 2 wire connection so there is 0 power in the lock wire (120V), this is the only 3 pole contactor that Honeywell makes that does not have any power in the lock wire.

Honeywell 3 pole 50 amp industrial switchgear provides power transfer and control circuit protection in commercial, industrial and utility applications.

This contactor is an integral part of the HONEYWELL 3 Pole motor Starter.

The Honeywell DP3050A5002 3-Pole contactor is an alternating current switch commonly used for three-phase electrical applications. The DP3050A5002 is intended for use in circuit breakers and load center applications.