Honeywell DP4040A5002 4pole 40amp 24v Contactor 4pole 40amp 24v Contactor

4pole 40amp 24v Contactor

DP4040A5002 4pole 40amp 24v Contactor

The Honeywell DP4040A5002 4pole 40amp 24v Contactor, works as they said it would. It is a hard to find item. Your service and delivery speed was great. I have already used your site again. And would reccomend this site to others.

The Honeywell DP4040A5002 4pole 40amp 24v Contactor is a single step-down switching device used to switch step-down voltage to a load. It is used in wide voltage ranges of 120/230VAC, or 240/250VAC, and its usage includes conveying, instrumentation control, lighting and AC power for communications equipment.

The Honeywell DP4040A5002 4pole 40amp 24v Contactor is an important component to control the position of the slide rails. It must be protected from exterior forces that might trigger a nuisance trip or damage the terminals. The Honeywell DP4040A5002 4pole 40amp 24v Contactor is a durable and easily installed device that will not allow voltage to be transferred through.

The DP4040A is a fully potted metal-encapsulated 4-pole change-over device intended for use as a disconnecting device between a 480V electrical system and three-phase motor or other loads. The DP4040A is the only 4-pole, 40amp 24v Contactor you'll need for your single phase AC motor load. It's covered by Honeywell's Classic Series 5 year warranty.

The DP4040A5002 4-pole 40 amp 24 VAC industrial power supply, with single-phase construction, is intended for use in applications that require multiple circuits or have harmonic filter requirements.

The DP4040A5002 Contactor is a four-pole device that controls wired motorized devices, such as sub panels and lights. It can be used to start motors or open flashers for certain fire alarms. The device has a range of 12V to 48V and a current capacity of 40amps. This industrial grade device has a frequency rating of 60Hz. The maximum contact terminal is 10AWG, while the maximum coil terminal wire size is 8AWG.