Honeywell MN6110A1201 N10 Series Non-Spring Return Direct Coupled Actuator - 6 inch - /U MN6110-c1

2pos/FltgAct24vac/dc w/2auxSws

The N10 is a medium size actuator. It has 2 axial outputs, 2 auxiliary switches and a standard 24 Vdc power input. When two auxiliary switches are used simultaneously, the actuator powers up.

The Honeywell MN6110A1201 N10 Series Non-Spring Return Direct Coupled Actuator is a pneumatic positioner actuator that requires direct coupling and fixed end (flange) mounting. This product has two single-acting or double-acting auxiliary switches, torque capacities up to 10 lb.-in., adjustable resolver sensitivity, with a DC sinusoidal input current range from 5A to 60A and 24VDC/30VDC. The maximum actuating air pressure is 75 psi. The control method is direct coupling. They are suitable for use with a wide range of valves,

The MN6110A Series is a heavy duty, direct coupled actuator designed for applications requiring optimum position accuracy and long service life at high speed. The actuator is designed to operate under a wide range of ambient temperatures. For use with small electric motors and DC brush type solenoids rated 24Vac/dc with current ratings up to 3A.

The MN6110A non-spring return direct coupled actuator, operating in balanced position, is a 6 inch pneumatic actuator and has three port and four wire design. It is intended for use in pneumatic positioners and controllers, metering systems, as well as in textile machinery. The auxiliary switches are normally open single pole, single throw switches rated 24 Vdc maximum. Auxiliary switch contact ratings are 0.5 A at 24 Vdc maximum.

The MN Series is a non-spring return direct coupled actuator designed for industries requiring 24 VDC or 24/120 Vac power source.The MN Series has a heavier construction with more mechanical advantage than the standard series. This mechanical advantage and the high flow design of the actuators allows precise and reliable control in micro-inch and nanoflow ranges. The low speed capability provides accurate control at cycling speeds down to 0.0031 in/sec (0.0762mm/sec) with great response time up to 1000 in/sec (25400 mm/min). Unique features of the MN serise include integral

This 2-position installation actuator is a device that, in response to an electrical signal, operates a valve or other controllable component. It drives the component directly without the use of a spring in the air circuit.

The MN6110 series provides accurate positioning in both rotary and linear applications with an integral position feedback potentiometer option. Compact, economical, non-spring return. Common mounting provisions and interchangeable actuator parts permit conversion from one mounting arrangement to another without actuator disassembly or internal overhaul.