Honeywell MP909E1059 Medium Force Damper Actuator with Spring Return for Variable Volume Terminal Units (5 to 10 psi)

"ACT.5-10 PSI 2.75""STROKE 6.6"""

Keep your terminal systems running smoothly, season after season. Our Medium Force Terminal Unit Actuators with Spring Return in 2.75" Stroke with Force Range 5-10 PSI are used to control fan speed and limit pressure in heating, ventilating, and air conditioning (HVAC) equipment. They are compatible with most HVAC controllers.

Control airflow in HVAC systems with this Honeywell MP909E1059 medium force damper actuator with spring return for variable volume terminal units. Designed to apply even pressure to a new or existing 3-way terminal unit, it has a 2.75 inch stroke and 6.6 inch overall length. The minimum application pressure is 5 psi and the maximum application pressure is 10 psi.

Electric actuator that delivers 5 to 10 psi (0.35 to 0.70 bar) medium force. Has a 6.6 in (16.8 cm) stroke length and an integral return spring for fast return to the neutral position when released. For NEMA 56-57 control boxes with TEFC motors."

The MP909E air volume control is used in variable volume terminal units (VVTU) up to 0.5"" for normal operation and up to 10.0"" for off-normal operation. This actuator has a 2.75"" stroke and 6.6"" throw, and includes a spring return mechanism. The MP909E is NATE certified to work with YC-B or YC-F Thermostatic Mixing Valves in heating and cooling applications, where the control valve is located within 20 feet of the downstream equipment, including buffer tanks and coils. The Body Temperature Sensor should be installed

The Formostar Medium Force Damper Actuator with Spring Return for Variable Volume Terminal Units (5 to 10 psi) is an actuator designed to change the volume of a duct system and control air flow. The product can be used for variable volume terminal units, which are installed in residential heating systems to regulate heating and cooling. The damper actuation range is 5 to 10 psi and the travel length is 2.75 inches. It's made of zinc-plated brass and stainless steel. This actuator doesn't include a spring plate or return spring, which must be purchased separately."

The Medium Force Actuator with Spring Return is designed for installation on Honeywell Variable Volume Terminal Units. The Medium Force Actuator provides a range of 5 to 10 psi (Pounds per Square Inch), and a stroke of 2.75" (inches).

A medium-force damper actuator with spring return for variable volume terminal units (5 to 10 psi). Actuator mounts at one end of the damper. The small tab on the mounting flange is designed to allow convenient mounting on the outside of a terminal unit housing.