Honeywell MP909E1380 Medium Force Damper Actuator with Spring Return for Variable Volume Terminal Units (9 to 13 psi)

DMPR ACT.-28/160F AMB.9-13 PSI

For use with two-wire modulating workstation air curtains and terminal units, TriMax variable volume actuator is designed for constant pressure operation at positive and negative flow rates. The 9-13 psi actuator has 10 steps at approximately 50 psi intervals. It features a lever operator that moves up and down by turning the lever arm from side to side.

We would like to introduce the Honeywell MP909E1380 Medium Force Damper Actuator with Spring Return for Variable Volume Terminal Units (9 to 13 psi). This terminal unit actuator is suited for slim-line boxes and features a 0-5 inch stroke, pre-lubricated with synthetic grease and installed with a spring return.

The Medium Force Damper Actuator with Spring Return for Variable Volume Terminal Units (9 to 13 psi) (MP909E1380) is necessary to install a variable volume terminal unit in a heating or cooling system. The manufacturer recommends replacing all gas valve actuators of the same type at the same time. This item is compatible with the Honeywell J-65 single-stage gas valve and the RSJ family of two-stage gas valves.

The Honeywell MP909E1380 Medium Force Damper Actuator with Spring Return for Variable Volume Terminal Units (9 to 13 psi) is ideal for use in fan-coil type header systems. This direct acting damper actuator is required whenever variable operation is desired or variable volume terminal units are used.

The Medium Force Damper Actuator is designed for Honeywell's 18 Series Medium Vane proportional terminal units. This damper actuator provides air pressure output in response to the control signal, and features a spring return. It can be used with honeywell's 18 Series terminal units that operate at 9 to 13 psi. The medium force actuator specifications include steel construction, ball bearings, aluminum piston rod with roller bearings, and a 5/8-inch diameter lead screw.

The Honeywell 909F1380 Medium Force Damper Actuator with Spring Return for Variable Volume Terminal Units (9 to 13 psi) is an accessory for use with variable volume terminal units. It is designed to meet the requirements of the Energy Policy Act, and reduces the amount of energy needed to operate heating furnaces.

Force damper actuator is used with terminal units that use a spring return and medium force. Actuator is designed for replacement or addition of air volume to the un-balanced split system and radiant barrier systems.