Honeywell 56285 SOLENOID VALVE ASSEMBLY WITH HOSE &

SOLENOID VALVE ASSEMBLY WITH HOSE &

The HONEYWELL SOLENOID VALVE ASSEMBLY WITH HOSE & CONNECTOR is designed to be used with the 56200 Series Manual Handle and 56201 Series Control Head.

This item is brand new, factory sealed Solenoid Valve Assembly with hose. Solenoid Valves are used in the Water Heater industry for automatic standby loss of pressure (SLOP) shutdowns and open/close control. The Environmental Protection Agency's Energy Star program has recognized automatic shutdown valves as a means to help reduce greenhouse gas emissions, water/energy costs and land use.

This Honeywell 56285 Solenoid Valve Assembly with Hose & Inlet is a genuine OEM replacement of the solenoid valve that is a part of your water heater tank. When this valve malfunctions, you also have issues with your water heater not holding pressure or functioning correctly. Tired of dealing with this issue and replacing it, order this replacement part from an authorized Honeywell distributor such as WaterHeaterSpareParts.com.

The Honeywell 56285 low voltage solenoid valve assembly is designed for use in hot water humidification systems. The heavy-duty solid brass body of this Honeywell 56285 solenoid valve is internally primed with mineral oil and the shaft is designed for contact at all times with a 1/8 inch orifice. This ensures that the solenoid will never burn out and that full operation pressure will be maintained. The solenoids powerful spring returns it to the normally open position, letting air in when needed and shutting off water flow when the furnace cycles on. This prevents hot water from running into indoor coil units

The Low Pressure Cut-Out Assembly is a solid state, spring loaded pressure regulator for use with hot water and saturated steam lines. The unique feature of this device is that it will automatically cut off the flow if pressure reaches the set point. This is accomplished by a special type of solenoid valve & fiber braided hose.

Solenoid Valves are relays with local control that operate switchgear, motors and other devices. Their main function is to operate or close a circuit by means of an external signal (usually electric current). The electrical signal to open the valve is sent from a circuit breaker. When the valve receives the signal it opens and allows the current to pass through.

The preferred replacement for Honeywell and other OEM part numbers 56213, 56279, 56320, 56285, 61660, 61661, 66900, 68322.