Honeywell MP909E1398 Medium Force Damper Actuator with Spring Return for Variable Volume Terminal Units (9 to 13 psi)

DMPR ACT.-28/160F AMB 9-13 PSI

The Honeywell medium force damper actuator (actuator with spring return) is ideal for applications that require a force of 9 to 13 PSI. It works in conjunction with most Honeywell terminal unit actuators, and springs return upon reaching the variable volume control's end position. It should be hardwired during replacement or setup.

The Honeywell medium force damper actuator with spring return for variable volume terminal units (9 to 13 psi) provides higher pressure range than standard actuators, offering high robustness and lower start-up tension.

Built for commercial applications, Honeywell's Medium Force Actuator is made of a die-cast zinc body with a nickel plating. The medium force actuator has an adjustable spring return that can be set for either normal or reverse operation. Further, this actuator is suited specifically for all Category II and Category III variable volume (VRV) terminal units and provides 9-13 psi pressure range.

MP909E1398 Medium Force Damper Actuator with Spring Return for Variable Volume Terminal Units (9 to 13 psi)

The Honeywell MP909E1398 Medium force Damper Actuator with Spring Return for Variable Volume Terminal Units (9 to 13 psi) is designed for the Honeywell TH8320 and 6300 multi-stage gas valve.

The Honeywell 1350 medium force damper actuator is designed for use with the Honeywell 411-422 series of terminal units. The spring return is factory set for 9 psi and 160°F maximum mounting temperature.

The Honeywell 909 Series actuators are preset to an outlet pressure of 9 psi. The operating pressure range is 3-13 psi (0.2-0.9 Mpa), allowing for adjustment at the valve.