Honeywell MP913A1011 PNEUMATIC PISTON ACTUATOR 10-15 PSI INCLUDES 90 DEDEGREE BRACKE #

PNEUMATIC PISTON ACTUATOR 10-15 PSI

Honeywell's line of Pneumatic Piston Actuators in the 10-15 psi range are designed to control position, pressure, volume, and speed. They are used in a wide variety of applications and industries, including:

Honeywell's high quality Pneumatic Piston Actuator, part #MP913A1011 is designed to handle through wall pressures of 10-15psi from a 3/8" diameter supply line. This part is especially effective in automated pressure balancing systems designed to reduce positive air pressure fluctuations in hospital rooms. This product also works great in residential and light commercial applications, as well.

The MP913A1011 Pneumatic Piston Actuator is a solid-state device that applies or releases pressure on command. It provides control over a wide range of pneumatic, fluid, electrolytic, or vacuum applications. This actuator is designed for 10-15 psi (pounds per square inch) maximum working pressure, and features an accuracy rating of 0.05% full scale (0.2% WSP).

The Honeywell Pneumatic Piston Actuator (PPA) is a pneumatic cylinder used to replace existing diaphragm actuators in valves used in several industrial applications. The actuator is designed for valve applications requiring 2-way control and a flow range of about 10 to 15 psi.

The Honeywell MP913A1011 Pneumatic Piston Actuator is a diaphragm actuator designed for use with air, nitrogen, inert gases. It provides smooth operation from 0-30 PSI and can be adjusted to 15 PSI max.

The Honeywell Pneumatic Actuator MP913A1011, 10-15 psig, 90° Stroke is used in a pneumatic system to convert air pressure from the system into movement, especially to extend the distance a valve may be opened or close it. The MP913A1011 has a 90 degree operating stroke with 15 psi of max. pressure and 100 psi of differential.

A pneumatically controlled piston provides reproducible, accurate movement for accurate stroke length and end position. Actuator has a 90 degree valve configuration with 21mm ported outlet and 4 pin M12 connector wire pig tail.