Honeywell MS4620F1005 Fast-Acting,Two-Position Actuator 6 inch - /U MS4120F-c1

230vFireSmoke175#2posSR Act

SootFireSmoke entry from Two-Position Actuators (M3) family. This is a subroutine 2 position actuator for CO2, dry chemical, halon and low expansion foam agents. Its built to meet or exceed UL standard 1460, NFPA 1992-2007 and NFPA 2010 2009 edition standards.

The MS4620F1005 is a two-position, fire/smoke alarm actuator. The MS4620F1005 provides high reliability and excellent response. Use this actuator for applications such as emergency device signaling and transfer interlocks or antique devices, which require a single-pole design. This unit is UL listed for smoke and fire detection and meeting applicable building codes.

The Honeywell MS4620F1005 6 inch - /U 230v two-position actuator is used to control electrical equipment after a fire, smoke or a heat sensor detects a fire. The actuator will deactivate the equipment so that nearby personnel and buildings are not harmed by letting the fire burn out. After the heat sensor stops detecting excessive heat, the actuator will reactivate the electrical equipment.

The Honeywell MS4620F1005 Fast-Acting, Two-Position Actuator for 6-inch and small 8-inch Duct Collar Damper, with Photoelectric Smoke Detector (PMD), is designed for use with fire/smoke dampers from 3 to 6 inches in diameter. The actuator provides two open and close positions — fully closed and fully open — to control the horizontal position of the damper. It can be mounted vertically or horizontally in the duct, before or after the PMD. The unit works on an "on/off" principle, in which opening requires

The MS4620F1005 is a high-quality, 6" two-position, snap-acting switch, designed specifically for use on general control circuits in fire detection systems. It is UL listed to U.L. Diagnostic Group Flammable (F) and Combustible (C) locations, having both UL File No. E361167 and Class A certification under NFPA-72.

The MS4620F1005 is a two-position actuator that can be used with natural, propane, or dual fuel fire and carbon monoxide detectors. The automatic reset thermal time delay and manual reset pushbutton help protect against nuisance alarms.

Aggressive fire protection in a small package. Medium-sized suppressors for commercial, institutional, and industrial applications.