Honeywell Q209E1002 , Inc. Manual Potentiometer for Modutrol Motor SPST On/Off Switch 150 ohms

150ohm POTENTIOMETER ExtMount

If you need a 150ohm pot on a 2 pin terminal block then consider our SPST POTENTIOMETER. The switch mount is the same was as the Modutrol Motor control from Honeywell. The pot used on this product is a 200ohm Bourns® brand pot with solder lugs provided for easy attachment.

The HONEYWELL Q209E1002, Inc. Manual Potentiometer for Modutrol Motor SPST On/Off Switch 150 ohms is a switch used for general purpose applications. It has a low volume height and is high in switching speed with no destruction to any relay contacts. The potentiometer is enclosed in a plastic box that is fixed to an existing automotive electrical structure, and it offers quick and easy mounting. The Honeywell Q209E1002, Inc. Manual Potentiometer for Modutrol Motor SPST On/Off Switch 150 ohms are available at 10%, 25

When replacing the DC Control potentiometer on the MODUTROL, the potentiometer should be replaced with a 150 Ohm Potentiometer

The Honeywell Q209E1002 , Inc. Manual Potentiometer for Modutrol Motor SPST On/Off Switch 150 ohms is a potentiometer that changes the speed of a Modutrol® motor. It contains two terminals and is sealed with a snap-on cover against dust and moisture.

The potentiometer ensures the motor will always run at the correct speed. This potentiometer is SPST, On/Off switch and 150 ohms resistance.

This 150-Ohm, Single-Pole Switch Potentiometer is used either for an Off or Float position when using a Modutrol motor on a Honeywell Alarm Control Panel. The potentiometer comes with a three wire pigtail connector.

These manual potentiometers are for the Modutrol Motor, It's a SPST On/Off Switch. The product dimension is 100mm x 24.5mm x 15mm.