Honeywell R24CB4007 HtSeq3sw.On & Off 1-110sec HtSeq3sw.On & Off 1-110sec

Heat Sequencer with three switches

The Honeywell R24CB4007 HtSeq3sw.On & Off 1-110sec Heat Sequencer with three switches is a 3-position, single pole-single throw (on/off), time-delay control switch that is designed to be used with gas or electric appliances. The delayed off feature of this switch allows time for the burner flame to extinguish after the unit shuts off.

Take the hassle out of managing a multi-rest cycle. This Honeywell Heat Sequencer is ideal for baseboard or conveyor heating units. Switch your heating device on and off automatically with our easy to use three rocker switches.

The R24CB4007 Heat Sequencer control can be used alone or combined with other Honeywell thermostats. This controller has six on/off switches that can be programmed to turn on and off heat in various parts of a home, such as a basement and garage, kitchen, living room and bedrooms. With the R24CB4007 also included is an automatic defrost feature that senses when the temperature inside is 0 degrees Fahrenheit or below for three hours and proceeds to automatically defrost the condensing unit.

This heat sequencer can be used to control the on/off function of heaters with a maximum power of 4,000 W. It is particularly suitable for a bathroom heating system. Heat to be controlled is available from 3 different sources, such as electric, gas and oil. The sequence is programmable within a time range of 1 to 110 seconds.

Honeywell R24CB4007 Miniature Single Pole 3-Way Heat Switch (On/Off/On Sequence - 1-110 secs)

Four switches for on/off control of heating devices and three separate circuits for heat sources. This is ideal for spas, bath systems, radiant floor systems, hydronic heaters, radiant heaters and other commercial applications. It conveniently connects three separate circuits to heating devices with a single appliance or resistance wire. Each circuit can control either one device or multiple devices with multiple ohm ratings for each control circuit.

Use the HtSeq3sw.On & Off 1-110sec to prevent drafts and deliver continuous heat or cooling at three different temperatures in one room. The Honeywell HtSeq3sw.On & Off 1-110sec is a wall-mounted control unit that mounts near your thermostat and provides three separate temperature settings. Since the temperatures are adjustable and independent for each switch, this item allows you to apply heat or cooling separately throughout your home. The Honeywell HtSeq3sw.On & Off 1-110sec is compatible with most ALH Series furnaces, including models