Honeywell RP819A1004 24V SurfaceMt E/P Relayw/SplBx

24V SurfaceMt E/P Relayw/SplBx

The Honeywell RP819A1004 24V SurfaceMt E/P Relay with Splitter Box, 3/4 HP motor is ideal for use in equipment protection to monitor larger, power consuming equipment such as pumps, compressors and water heaters. The RP819A1004 is a combination of two separate devices to monitor the load and trip the circuit breaker.

The 24V SurfaceMount E/P Relay with SplitPack™ Bipolar Barrier is a miniature device that switches up to 20 VDC or 12 VAC. It is suitable for switching high power up to 800 mA, and has a clamping voltage of 1000V (rms). The relay provides reliable electrical contact using the quick-connect terminal - simply press the wire into position and release. Adhering to IEC standards, it is resistant to dust and liquids, and features an operating temperature up to 50 °C (120 °F). Made in Germany and assembled in the USA, it is compatible with

This RP819A1004 24V SurfaceMt E/P Relay with Plunger features include the following specifications: enables permanent surface mount installation, stainless steel plunger, high overload capacity, high burst rate capability, and visible circuitry for diagnostics.

Plugs into 12VDC power supply or directly into Honeywell panel with 6 or 10 terminals, depending on panel. Replaces original surface mount E/P relays. This DIN-rail mount relay is perfect for mounting in enclosures or in panels, will not block adjacent circuit terminals when adding onto a loop wiring system. Relay has single pole, double throw switch that closes two contacts upon receiving input from the controlling device. Ideal for applications including starting and stopping devices in heating, ventilating, and air conditioning systems.

Control up to 3 AC or DC Industrial-rated electric motors from a 24V DC source. This E/P Relay with splined base comes prewired with a 10' cord and is designed to mount onto a standard DIN rail...

The 1/3 HP RP819A1004 24V Surface Mount Electric Baseboard Heating Element is intended for use in electric baseboard heating systems. The 1/3 HP RP819A1004 24V Surface Mount Electric Baseboard Heating Element comes with a front-loading single pole, double throw (SPDT) terminal block.

This 24V relay is for use with an Emergency Power Off switch. The relay can be used in conjunction with a properly wired E/P switch to prevent accidental activation, or paused RPM's when shutdown situations occur. The RP819A can also be used to close down your electric power when your plant goes into

The RP819A1004 is a 24V relay used in electric power-assisted brakes on general aviation aircraft.

The Honeywell RP819A1004 replaces the discontinued RP819A.

No description