Honeywell T4159A1020 120-277v HeatTstat 40-80f SPST 120-277v HeatTstat 40-80f

120-277v HeatTstat 40-80f SPST

120-277v HeatTstat 40-80f SPST

Honeywell T4159A1020 120-277v HeatTstat 40-80f SPST 120-277v HeatTstat 40-80f

Get professional performance and reliability with the Honeywell T4159A1020 120-277V HeatTstat 40-80F SPST 120-277v Zone Mount Kit. It uses a time-based temperature control module (TTC) to control the heating and cooling equipment used in residential and light commercial applications. The Honeywell T4159A1020 120-277V HeatTstat 40-80F SPST 120-277v Zone Mount Kit is designed for use with a 2 wire circuit and can be used on systems operating in temperatures up to 80F. This Honeywell T4159A1020

Honeywell T4159A1020 HeatTstat 40-80f SPST 120-277v prevents equipment from overheating during a power failure by automatically lowering the equipment's temperature setting to a safe point. This Honeywell T4159A1020 12-Volt 40-80F thermostat is 120/277 volt and has an ON/OFF switch that acts as the manual reset override switch. The heatstat is configured with a self-closing door and requires two wire leads. Features: Honeywell T4159A1020 Heatstat for HEPACool™ Air Handlers and

The T4159A1020 HeatTstat 40-80f is a single-pole non-programmable thermostat designed for 2 stages of heat or cool, and is intended to control conventional hydronic or electric baseboard heaters. This thermostat has clearance from floor space of 5.25", and requires a minimum air gap of 2".

Give precise temperature control to any room with this Honeywell HeatTstat. Sporting a 40-80f temperature range, it is perfect for cooling or heating a room, and it can be wired for either single- or multi-stage thermostatic control.

Honeywell T4159A1020: 120-277 VAC, 10 Amps, 40-80 F (4 C - 37 C) Operating Range, 2 Stage Thermostatic Control, SPDT Relay in Normally Open Contact, 1 SPDT Normally Closed Contact, (Relay Lug Terminal SPST Form A Switch), Mounting ears accept most 2 in. x 2 in. junction boxes