Honeywell T631A1154 Agricultural Temperature Controller Farm-O-Stat 3 inch - /U T631A-c10

TEMP CONTROLLER

The Farm-O-Stat is a thermometer controller designed for use in precision agriculture. Like all Temp Controller products, the T631A1154 has a self-contained reservoir and circulatory system all in one unit. The product is ideal for growers who want to control temperature through a localized sub-surface hydration probe. It can be used in conjunction with Farm-O-Stat 2? and 3? tubing set ups and other Temp Controller accessories. This is especially useful in frost protection zones where protection can be achieved by making slightly warmer when frost is expected.

REGULATOR,TEMP,OUTDOOR, HI SIDE,0-30F DEG F The Outdoor Temperature Controller digitally tracks and controls the temperature in a variety of outdoor systems such as an outside walls and walkways of commercial properties.

The Honeywell T631A1154 Agricultural Temperature Controller maintains the temperature of a holding cabinet, greenhouse or cold storage room to keep product fresh and free from botulism. The controller monitors the ambient air temperature and adjusts 2 independent heaters if the internal temperature moves above or below the set point. Use in rooms up to 200' or with fans for distances up to 500'. This controller can be installed on a single 25-26 amp 120 volt circuit.

The T631A-c10 is a stand-alone temperature controller featuring one digital input, two relay outputs and H1 and C functions. The unit can be used as a thermostat to control room temperatures of incubators and freezers to within 1/2 degree in any preset temperature range or as a dual stage on/off control for heating or cooling applications.

Honeywell's T631A-C10 Agricultural Temperature Controller is the perfect fit for crop irrigation, greenhouse temperature control, or water pump/sump temperature monitoring. This controller maintains a linear temperature range of 0 to 120°F and is watertight with a calibrated thermowell, pumping time accumulation, and the ability to maintain a set point ±0.7°F.

The T631A-Series controllers are used in agricultural applications for controlling the temperature of livestock. Rear mounting is typical for most units with some models having optional front panel mounting.

Six digit temperature display, removable sensor probe for calibration (C type) and temperature compensation, automatic shut-off system, reverse polarity protection, over temperature protection and dry contact.