Honeywell VBN2AFPXC000 "1/2""NPT FLT/2PO NSR 24V W/AUX"

"1/2""NPT FLT/2PO NSR 24V W/AUX"

The Honeywell VBN2AFPXC000 1/2""NPT FLT/2PO 24V W/AUX Wall Heater featuring a sleek, slim profile is designed for use in high traffic areas. This indirect, non-ductable unit is available in a wide range of power levels to meet your specific heating requirements. The wall heater circulates warm air through the room using zoned or whole-room forced-air systems and requires Greenheck HVAC wall insulation kit to provide up to R-18 rating. The VBN2AFPXC000 operates at 120 Volts and has

This VBN2AFPXC000 Honeywell 24V Auxiliary Pump is a replacement electric pump that is used for irrigation, pool, pond and other water transfer or drainage applications. The product features include 1/2" NPT flt/2PO NSR, 24VDC with AUX and is protected against electrical shock (ESD).

The VBN2AFPXC000 24V 2-Port slide/fill valve replacement system is designed to convert from a separate float and pump system to a single, compact assembly. The advantage of this system is the installation of the valve will be easier than on the dual float systems. You can achieve higher flow rates and increased energy savings with this new design. The versatility allows for more flow rates to be configured with both flows being controlled from one pneumatic controller, thus reducing inventory costs.

The VBN2AFPXC000 Honeywell 24V Industrial low position solenoid valve is a Low mode, normally closed solenoid valve. It is designed for non-retractable float actuated valves and provides normal-flow process as long as the float remains in the down state.

The Series VBN2AFPXC000 Wall Switch provides powerful performance at an incredible value. With TruePower (TM) Technology, this 24V wall switch fan converter is capable of closely matching the full load performance of other more expensive designs.

Honeywell offers a full range of s contractor-grade valve controllers that fit into a standard 1/2" conduit.

Visible Boiler Non-Programmable with Auxiliary ContactsThis boiler is a heating unit that will keep water above 212°F. It does not have an electronic controller or timer and must be installed into a fully automatic control system. For non-pressure applications, the tank temperature can be controlled using a N/O or N/C adjustable pilot burner valve. For higher volume applications, the tank temperature can also be controlled using a temperature transmitter and heating coil.