Honeywell VBN2AGPX7100 "1/2""NPT 2.6Cv 2POS SR N/O 24V"

"1/2""NPT 2.6Cv 2POS SR N/O 24V"

"1/2""NPT 2.6Cv 2POS SR N/O 24V" is an OEM part used in Honeywell commercial applications which require the highest degree of reliability and performance. This motion sensor switch operates at 120 Vac and 60 Hz to provide the ultimate fail-safe protection for a wide variety of different commercial s...

The Honeywell VBN2AGPX7100 is a 1/2" NPT 2.6Cv SPDT 24V normally closed solenoid valve with stainless steel body and brass end connections. The solenoid is NC (Normally Closed).

The Honeywell VBN2AGPX7100 Remote Pushbutton Switch 80VA, 2.6Cv @ 24V is a 2 position normally open remote, (NO) panel-mounted momentary contact switch used with a variety of control devices. These switches are designed for mounting in a standard electrical box, and protected against dust and moisture by Type 4X IP67 ratings

Description:4-WAY VALVE N/O DOUBLE 24V

This is a Honeywell VBN2AGPX7100 / 1/2" 24V Actuator. This actuator consists of two terminals. The terminals you will use to wire the actuator depends on what you're doing with it.

These valves use low voltage control with the added protection of motor overload protection, manual override and user settable pressure point. These solenoid valves have M10 threaded connections as well as four way switching capability, enabling them to function either independently or in sequence.

This Honeywell Thermostat is compatible with gas, oil, or electric systems, and can be used for radiant floor heating. The thermostat serves as a manual on/off switch for a 230V gas valve. It can also be used with a 280V contactor. It features a solid state design with no moving parts to wear out.