Honeywell VBN2AGPX8200 "1/2""NPT 2.6Cv 2POS NC 120/240V"

"1/2""NPT 2.6Cv 2POS NC 120/240V"

Honeywell VBN2AGPX8200 "1/2""NPT 2.6Cv 2POS NC 120/240V" is used in industries such as Automotive and powers heating and air conditioning systems, Large commercial AC units, Industrial boilers, Heating ventilation and air conditioning systems.

Honeywell VBN2AGPX8200 "1/2""NPT 2.6Cv 2POS NC 120/240V" Pressure Reducing Regulator Preassembled with one or two 1/2 inch NPT gas ports. Automotive type screw or bayonet connection (see chart for specific model). Gauge pressure up to 6 psig. Regulates gas pressure to 1/2 inch NPT equipment such as LDV's. Features extended nozzle, with gauges at the highest and the lowest outlet port."

The VBN2AGPX8200 is a 1/2" NPT Two-Position Air/Gas Valve with 2 Positions and NC 120/240V. It features an open pilot position and close pilot position while in normal operation. In its open position, this valve allows pressure to be maintained in the system and air to flow through it unmetered. When the valve is in its closed position, no air or gas flow passes through it until the control signal energizes the pilot and opens it, at which point both air and gas flow through it.

Polypropylene, 2-position DV8200 Rotary Vane Vacuum Regulator provides accurate flow control and enhanced performance over conventional diaphragm regulators. The DV8200 regulates 0-2.6Cv to 2-position low pressure devices with a minimum leakage of < 1mPa at any position of the adjustment knob.

The VBN2AGPX8200 is a power valve that offers a 2.6 cavitations per cycle. It has control type, normally closed and it is made in China.

The Smart Vane VBN2AGPX8200 by Honeywell is a 3-position, spring return actuator with adjustable knife edge for 0-3/4" or 1" tubing. The 2.6 amp motor can open and close the ventilation valve in any position. The 8200 series actuator is ideal to control ventilating fans, air intakes, exhuast dampers, building heat ventilation and air conditioning systems, solar applications and other variable flow hydrants applications.

Compact thermostat sensing units are used for on/off control of single stage gas valves and convectors. The thermostat has 2-wire connections, a snap-in mounting flange, built-in power supply cord, an air filter and a manual safety reset switch.