Honeywell VBN2AHPL2000 "1/2""NPT 2W 4.7Cv 2POS NSR 24V"

"1/2""NPT 2W 4.7Cv 2POS NSR 24V"

One (1) Honeywell Back mount Interconnect Kit for 2W-4.7Cv with Neutral Safety Reversal"

Honeywell 2-Position, Normally Closed, 24VDC switch with 4.7A/250VAC rating; 1/2"NPT X, Y, Z

The VBN2AHPL2000 is a 1/2" NPT non-sparking thermal overpressure relief valve. This valve has two port, two position, normally open. This valve is normally in the open position. When the coil is energized, this valve will close until the pressure drops below a set level."

Honeywell VBN2AHPL2000 is a Ball Valve N 2 W, 4.7 mA 2 Position 24 V DC Digital Output - 1/2 Inch Male Pipe Thread with Internal "ON" Switch

The compact, single-phase, 2 W, 24 V electronic proportional solenoid valve, features a normally closed type that is normally open with a trigger signal. It is used with heating or air conditioning equipment, and the control circuit can be directly powered by the valve. The sensitivity adjustment of the digital circuit reduces the load on the operating machinery and can also adjust pressure difference within the control valve as required.

This Honeywell VBN2AHPL2000 is a 2-Wire (w/ leads) PTC thermistor for use in zone control and proportioning systems to provide a trip level at the end of the supply line. It's wired, compact design complements other Honeywell Thermostats.

Open your door to the world of valves with the Honeywell VBN2AHPL2000 valve. This 2-way ball valve is built without a handle, and can be used in extremely low pressure applications, is extremely durable, and easily complements piping systems. Welcome to the world of valves.