Honeywell VBN2AHPA2000 "1/2""NPT 2W 4.7Cv 2POS NSR 24V"

"1/2""NPT 2W 4.7Cv 2POS NSR 24V"

Honeywell's VBN2AHPA2000 "1/2""NPT 2W 4.7Cv 2POS NSR 24V" is specifically designed for heating, ventilation, air conditioning and refrigeration applications. This unit has a 1/4" connection at the valve and a 1/2" connection at the solenoid."

The VBN2AHPA2000 is a 2W, 24 VDC (3 wire), adjustable, 12-24 VDC/12-24 VAC output, normally closed current limit control. Control has 4.7Cv to handle two pole motors rated 1/4 to 1 horsepower with short circuit protection and over temperature shutdown. Limit control can be connected to terminals as field wiring D and C. One push button service test without removing from mounting bracket for installation convenience. The terminals are arranged in standard Aly/BH format for positive ground installations. Built-in audible alarm indicates condition of process: Normal, Fault

A 24V 4.7Cv Shunt trip (VBN2AHPA2000) is a device that can be used to cut off the electric supply, for example, if an overload or short-circuit occurs. The code required trip devices must only be adjustable and set to trip at a preset level of current or voltage. The settings on the trip device and the electric equipment are designed so that when there is an abnormal situation with the electric equipment such as an overload or short-circuit, the trip will automatically switch off the power. The devices will also reset in response to a circuit interruption caused by switching

The VBN2AHPA2000 1/2" Natural Gas Breaker is used to control, protect, and supervise two-watt 24-volt circuit breakers. This Honeywell product is part of a complete line of gas controls.

Honeywell 1/2" NPT Dual Temperature Ptac Production Pump, Model# VBN2AHPA2000

The VBN2 series (Vacuum Breakers, 2-W) is suitable for use in lead free applications. Vacuum breaker for water sources and fixtures designed to prevent siphonage or backflow of contaminated water into potable water systems.

The VBN2AHPA2000 is a flow rate transducer designed for harsh industrial applications. It has 2-inch (51 mm) NPT compression connections, with a 2 W pressure transducer and output signal type of 4 to 20 mA.