×
Free Shipping @ Any Price
Best Price GUARANTEE
30 days money back
Honeywell VBN2BJPA3000 "3/4""NPT 2W 7.4Cv PROP NSR 24V"
click to zoom in

Honeywell VBN2BJPA3000 "3/4""NPT 2W 7.4Cv PROP NSR 24V"

Price: 2099-12-31 $209.52
Free Shipping
In stock
1 days
  • Shopper Award

"3/4""NPT 2W 7.4Cv PROP NSR 24V"

The Honeywell VBN2BJPA3000 "3/4""NPT 2W 7.4Cv PROP NSR 24V" is used to drive paddlewheel-type circulation pumps in swimming pools and spas.

If you are looking for 3/4""NPT 2W 7.4Cv PROP NSR 24V, then you have come to the right place. Check out this Honeywell VBN2BJPA3000 that is available below.

The part number VBN2BJPA3000 is a genuine manufactured Honeywell part, it's part of the valve series. The valve is manufactured for use with hot water products on natural gas and propane. The body style is 3/4" NPT 2W 7.4Cv PROP NSR 24V. It's dimensions are .300 in (H) x 6.54 in (W) x 12.52 in (D).

The VBN2BJPA3000 is a high-flow (7.4 Cv) low NPSH (0.6 m) vacuum pump providing 24 V power and 3/4"" NPT outlets for maximum flexibility. The new design incorporates an aggressive, cast-aluminum impeller that handles a wide range of fluids including heavy liquids with an added 304 stainless steel mesh filter to protect the impeller from damage.

The VBN2BJPA3000 water heater immersion element is designed to replace your current electric water heater immersion element or to replace the current element with a warranty. This immersion element heating element is 120 Volts and will fit most propane models with 3/4" NPT connections.

Clipsal's  passive Infra-Red (PIR) 24V Switches with (1) 3/4"" connector and a measuring range of up to 10 metres (30 feet).

Honeywell Proportional, 2-Wire 24 Vdc Solenoid Valves Include Programmable Pull Switch and Built-in Power Transformer for 24 VAC or 24 to 120 Vac, 6.2 mA, 60 Hz Resistive. Directional shutoff with pilot operation. Integral atmospheric pilot with indefinite standby time and backflow prevention. Two independent, normally closed ports for direct actuation of two devices via common power supply. Wiring external to solenoid valves simplifies field wiring and prevents damage due to contaminated liquids or condensation. Maximum operating pressure: 122 psi at 68F (15 bar

1 days
  • Weight: 0.00 LBS
to top