Honeywell VBN2CLSXD000 "1""NPT 15.3Cv PRO NSR 24V W/AUX"

"1""NPT 15.3Cv PRO NSR 24V W/AUX"

The VBN2CLSXD000 1"NPT 15.3Cv Pro NSR 24V W/AUX is designed to provide maximum reliability and performance for continuous operation in variable speed (0-6,800 RPM) applications. It is specifically suited to handle high flows for improved performance at low supply pressures. The PRO series design utilizes balanced flow, which results in superior steady state pressure. This compressor has capability to run extended service intervals by controlling the ambient temperature with Honeywell Enhanced Extended Life Technology (ELT) relative to the specific application.

Honeywell's PRO NSR 24V W/AUX promotes inlet pressure stability while minimizing cavitation. The Compensated Proportional Solenoid delivers precise control at the valve outlet, resulting in a smooth flow curve and accurate on-off response time. The high power valve comes with a diaphragm and is precharged with Nitrogen for maximum durability. 15.3Cv PRO NSR 24V W/AUX

With the Honeywell VBN2CLSXD000 1" NPT 15.3Cv Pro 24V XFMR for KO you no longer have to worry about excessive energy bills. This commercial product comes with manual reset protection that prevents incorrect heating and overheat conditions. In addition, it can heat up to 815°F without tripping a circuit breaker.

The VBN2CLSXD000 is a Honeywell Pro Series Non-Programmable Controller. This water-resistant, NSF-certified oven thermostat has a 24 Hr/1 Week Timer Control. With a flow range of 2-8 GPM, this device has a heating capacity of 5400 Watts (Voltage:24 V; Current: 15 Amps). It is equipped with a Maintained Residual Heat Removal option, and is designed for control of hot water, steam, or gas up to 400 Degrees F. Use this 1""NPT 15.

The Honeywell VBN2CLSXD000 is a 1" Non-Submersible Electric Pump that operates on 24 Volts. This pump is designed for commercial applications and delivers a flow rate of 15.3 GPM at 100 PSI from a 2.6 ft lift. It has an optional plug in auxiliary switch that allows the user to remotely operate the pump.

Continuous, 24 V at 3,400 LOAD W/AUX Thermostat Ideal for use in large pipe distribution systems to minimize the number of individual zones for moderate temperature control.

The VBN2CLSXD000 is a Series C Wall-Mounted Outdoor Non-Programmable Valve. It comes in a natural steel color and has a maximum working pressure of 15.3 psi. This valve comes equipped with a flow indicator and is energy efficient.