Honeywell VBN2CLSXA200 "1""NPT 2POS SR N/C 24V W/AUX"
"1""NPT 2POS SR N/C 24V W/AUX"Honeywell VBN2CLSXA200 "1""NPT 2POS SR N/C 24V W/AUX" is a 1 Inch NPT 2 Position Solenoid Valve. This item has been discontinued by manufacturer.Make sure your...
My Account
If you are already registered, please log in.
Create your account and enjoy a new shopping experience.
Create A New Account"1""NPT 2POS SR N/C 24V W/AUX"
The VBN2CMPXA200 is a 1"" NPT Two Position Solenoid Valve that cycles on/off when activated by a dry low voltage connection. From the Honeywell Alerting & Fire Alarm product line, this valve will enhance your security system and provide you with the maximum protection possible. This valve is compatible with any of the following security systems if used in the "Fire" position:
The VBN2CMPXA200 1""NPT Digital Solenoid Valve is designed for use with the SV4-Solenoid Valve Interface Module. The valve requires 2-wire 18-24 VDC power and 2 separate normally closed contacts for control signal. The valve is current limited to maintain a safe trip level for the solenoid. When energized, the solenoid opens wide and allows fluid to flow through the valve. The constant contact signals are connected to normally open (NO) or normally closed (NC) pilot contacts of an actuator such as a proportional two-position cylinder valve
The VBN2CMPXA200 control panel fits in 1" spaces, has 2 positions, normally closed, 24V DC supply voltage and solid state relay with auxiliary contacts. It is for use with Heil, 2-wire or 3-wire control circuits. Temperature range is from 0-50 degrees C. The control panel meets Underwriters Laboratory (UL) standards. For indoor use only.
The VBN2MPXA200 gas valve combines Honeywell safety and reliability with the world-class design of the Trimline V Series. With its 1" NPT steam port and 2 switch positions, this valve was designed for easy replacement in current one boiler systems, providing flexibility in installation and configuration. It also has a built-in sensing circuit that provides diagnostic assistance when troubleshooting the system.
Using 2-wire N/C solenoid valves, the VBN Series Solenoid Valves operate on 12-24VDC power. The valve uses 2N/C 24V coil and has a preset pressure relief. The complete selection of fail-safe devices include: 2N/C 24VDC Coil, 2N/C 24VDC Reed Relay and GPO67 3A 24V Magnetic Contactor.
The VBN2CMPXA200 is a 2-position normally closed position sensor. It incorporates an on-board relay that is activated by a change in temperature. The large 4-pin connector makes it easy to install.
The VBN2CMPXA200 temperature transmitter is an absolute pressure Transmitter with a two 3/8" NPT process connections and digital LCD display. It is recommended for applications that use pipelines, vessels, valves, pumps, and other equipment used in liquid and gaseous media systems.