Honeywell VBN2DMPX9100 "1.25""NPT 2PO NO 120/240V W/AUX"

"1.25""NPT 2PO NO 120/240V W/AUX"

The VBN2DMPX9100 is a 1.25""NPT 2PO NO 120/240V W/AUX mounted on the outside case of the Honeywell VPH890 Series HCM800 Humidifier. This unit can be used for Commercial applications but if you need to use this in a Residential application, please contact your local Honeywell Distributor. (Note: This item does not come with humidifier or any accessories.)

Honeywell's VBN2DMPX9100 1.25" NPT 2 PO No, 120/240V w/Auxiliary Power Supply is used for the TXV-3 heating and cooling system, part of H2 line of heating and air conditioning equipment.

The Honeywell VBN2DMPX9100 is a 1.25" NPT dual position no with auxiliary contact for two pumps rated at not more than 180 PSI. The offer includes the valve body and mounting screws, but does not included the wiring or the trim kit.

The HONEYWELL VBN2DNPMX9100N is a high performance form factor 28VDC 2 PO NO (Normally Open) electromagnetic valve that is used in a variety of applications. The HONEYWELL valves are designed for use with Honeywell UPS systems that have an auxiliary contact output allowing for control of 115 volt devices through the 12/24 volt DC signal wire. The HVAC controls will have a START and STOP control signal, and the non-Honeywell equipment will also have a LINE VOLTAGE ON/OFF which can be used to activate electrical shut offs or caps.

A 2-pole 120/240 VAC, 60 Hz 5 kW Industrial Valves with a Low Pressure Poppet Seat (2 Stage) and a 10 ft (3 m) NEMA 5-15P power cord. Delivering a high quality, durable 2 stage Series 7000 Valve coupled with superior performance, Honeywell's Series 7000 family is your solution for the most demanding applications.

The VBN2DMPX9100 provides a wide range of installation options with 2 ports for 120/208 to 240V 20Amp service and 1 port for 120V 10Amp service. The compact size and a 3 position locking device allow for panels to be mounted horizontally or vertically. The NEMA 4X enclosure includes an insulated cover, gasket, rear panel, conduit knockouts, refrigeration field winding kit (including electrode), and an Auxiliary 24V 12/24VAC 2A Power Supply.

The VBN2DMPX9100 is a permanently lubricated solid-state, normally closed, snap action switch with built-in auxiliary contacts. The reversible mounting plate allows for four possible positions when mounting with the corrosion resistant stainless steel back box cover.