Honeywell VBN2ERPX0000 1.5NPT 2W 74Cv BRS DCA PRFL

1.5NPT 2W 74Cv BRS DCA PRFL

A Cv or capacity valve is an accurate flow control device which allows you to regulate the output pressure of a BRS DCA pump assembly. This Honeywell 1.5NPT 2W 74Cv BRS DCA PRFL is a heating/cooling controller, a control loop system that monitors and automatically controls temperature or pressure by regulating the power supplied to an electric heat, electric resistance, steam or hot water heating element.

The VBN2ERPX0000 1.5NPT 2W 74Cv BRS DCA PRFL is designed to meet the water treatment needs of a wide variety of businesses, including day care, medical, food service, commercial kitchens and other light industrial applications.

Honeywell VBN2ERPX0000 1.5NPT 2W 74Cv DCA-PRFL 2 Way DC Solenoid Valve

The Honeywell 1.5NPT 2W 74Cv Temperature Control Valve is designed for gas-fired condensing boilers. It regulates room temperature by modulating the flow of gas from the ceil or floor, based on the economizer position. The valve is fully ported to allow direct connection to upflow and horizontal flue connections.

Honeywell's PRFL valve is a 1.5NPT two-way valve that has been optimized for use in low to medium temperature refrigeration systems. The unique design capacity of the PRFL prevents it from running dry during defrosting cycles, preventing costly repairs and equipment down time.

Our Honeywell VBN2ERPX0000 is a Back-Pressure, CRNFE Series, 1.5 NPT 2 W Steam Trap with a Brass Body 1.9 "(H) X 4.4(W) X 5.7(D). This product is designed for use in commercial applications and has a 34 PSI Minimum Sealing Pressure, Operating Temperature of Bellow 450°F and a Maximum Temperature of 450°F. Specifications are as follows:

The red handle on the Honeywell Econoswitch 1.5NPT 2-wire DC Control Valve makes it easy to find and operate. The valve is designed to control flow or shutdown applications for gas hobs, pool heating, boilers, and more. It passes a maximum of 150 PSIG at full flow and has a maximum pressure of 250 PSIG. When in manual mode, the valve has two positions: ON/OFF (full flow), and OFF. The orange LED indicator on the valve changes color from green to red when in automatic cycle; this is a sign that the valve is sensing process temperature