Honeywell VBN3AEPX8300 "1/2"" 3W 1.0Cv 2POS SR 120/240V"

"1/2"" 3W 1.0Cv 2POS SR 120/240V"

"1/2"" 3W 1.0Cv 2POS SR 120/240V"

The VBN3AEP is an installation grade, 1.0 Cv, 2 position switch rated for 120/240 VAC. The installation grade VBN3AEP features a silver wetted enclosure and is rated for use in harsh and corrosive applications such as the petrochemical industry, wastewater treatment plants, dairies, beverage plants, chemical processing plants, breweries, electrical substations and vehicular air conditioning units.

Two-way, three-pole Air Discharge Valve. 120/240VAC. Switching rated. Brass body with functional Teflon® bushing. Flow range is 0-200 CFM/MIN. Exceeds NEMA C73, Class B requirements for air discharge valves. 3W @3.5Psi ACSR contact. Suitable for process and negative pressure applications in sound or difficult venting systems where the presence of oil is not objectionable and where corrosive vapors are not present. Floating disc pilot safety device has a point of operation located below the mounting flange and above the condensed

The VBN3AEPX8300 is a 1/2" Non-Zero-Crossing Solid State Relay (ZCsS-SR) with 2 output contacts. This AC relay allows 120/240Vac wattage up to 1800W, 50/60Hz and can switch 1Amp inrush current. The VBN3AEPX8300 SR has an adjustable time delay that can be selected from off (0s) to 10s (maximum), and it has input overload protection and short circuit protection, as well

The MOTIVA Low Watt, 1/2" MVAC Air Gap Switch, 120/240V is designed for use in all sub-metering and sub-heating applications. The VBN3AEPX8300 Honeywell Air Gap Switch is adjustable up to 6'' of static pressure and uses a 19mm square mounting pattern for easy installation.

The Honeywell 1/2” Brass B500 Wall Thermostat comes with a 2-hole mountable plate that can be used with most standard wall plates. The thermostat incorporates a special wire that is thinner than traditional thermostat wiring to enable more installation options, such as in a new wall. With the easy set feature this thermostat has, users will never have to worry about programming the settings since the pre-programmed settings are capable of meeting the needs of 90 percent of all residential heating and cooling systems. To top it all off, the Honeywell 1/2” Brass B

Clean and safe, the Honeywell VBN3AEPX8300 switch is for use on electronic induction motors and other general-purpose applications. The industrial switch can handle 1/2 hp at 120 or 240 volts of alternating current at a maximum temperature of 40 degrees Celsius. It is designed to withstand operating forces up to 10 pounds.