Honeywell VBN3AHPXC000 "1/2"" 4.3 FLT/2PO NSR 24V W/AUX"

"1/2"" 4.3 FLT/2PO NSR 24V W/AUX"

Honeywell VBN3AHPXC000 1/2"" 4.3 FLT/2PO NSR 24V W/AUX

This is a 24-Volt, 1/2 In. 4.3 FT/8.3 m 2 POLE/ 3 WIRE (NON-STOP) with P-TACT Relay - Snap Action Auxiliary Circuit Breaker (Manual Reset), General Purpose circuit breaker is suitable for use in Control Panels and circuit breaker panels for Control Combinations such as those used aboard ships, in trucks, ships, locomotives and on busses among other marine vehicles from the sea to the land

The VBN3AHP 24 Volt is a "1/2"" High Pressure Air Blower System" with a "High Performance Vortex Blower". It has an air flow of 4.3 ft. The recommended operating pressure of the VBN3AHP 24 Volt is 115 PSI and has a voltage of 24V.

This auxiliary contactor operates a two-pole air-over-oil motor at 24 V AC at 0.58 A and is designed for use with the Multipanel VFD. It has a switching capacity of 4.3 FL or 0.2 A per pole and an auxiliary contact that can be triggered for limit switch applications.

This replacement transformer is built for long life and trouble-free use. It works on 24 volt systems that accept a 2 pole, 4 wire input (-/N/L1/L2). Voltage can not exceed 24 volts. This Honeywell transformer will control and operate Honeywell's wireless accessory products, if installed with compatible Honeywell wallplates.

This unit features an AUX contact that is compatible with the VNP200 Network Interconnect Module, allowing communication with these and other Honeywell 6000 series wireless devices. It is also compatible with Honeywell's FSNW9545F notification appliance, which will make an audible sound when this unit detects a fire condition.

This 1/2"" air rotary hammer is designed to drive with three-face carbide-tipped hammer bits and 1/2"" air ratchet wrench. It provides high rotational speed for fast drilling and chiseling of rounded surfaces, crumbling concrete blocks, tiles, granite, asphalt and masonry. It also features a quick-change bit and auxiliary handle allowing you to use the hammer as an ordinary drill. Packed with high performance applications for construction site, construction clean-up and demolition job sites.