Honeywell VBN3DMPX6400 "1.25""NPT 3W 27Cv PROP S/R 24V"

"1.25""NPT 3W 27Cv PROP S/R 24V"

Honeywell's VBN3DMPX6400 is a "1.25""NPT 3W 27Cv PROP S/R 24V" for use with humidifiers and air purifiers thoughout the home and commercial building.

Located near the center of the VBN3DMPX6400 is a "prop" with a single output. It starts as high as 240 Volts and drops to 24 Volts at low RPM's. I measured it at 1.25-Inch NPT, and it can handle 3 watts from the motor, and running on 27Cv PROPANE gas.

The VBN3DMPX6400 is a single-stage, with PROP. 24 V 1.25" NPT centrifugal pump designed for general purpose liquid transfer and pumping. It offers 24 V DC electrical connection and is enclosed to IP 55 standards for protection of the pump against ingress of foreign particles and continuous pressure in steam environments with water content not exceeding 98%.

Single station, 24V direct drive propane gas valve with ANSI/NEC class 2 wiring requirements. Meets ANSI Z21 standards and is NFPA 58A and UL224 compliant. Features a 1.25"" NPT input and output connection, non-corrosive stainless steel frame, brass forged orifice and thermally protected motor housing.

The VBN3DMPX6400 is a 1-1/4 in. NPT wetted parts; 3 watts, forward/reverse pump, 24 VDC. It features a continuous on/off rocker switch and a convenient status light for fault condition diagnosis. The robust design of the pump provides long service life and reliable operation. The dual ball bearings assure smooth operation while providing maximum efficiency. The maximum pressure with 25C water is 38 psi (or 280 kPa), so it's ready for residential or commercial use and provides high flow rates at low pressure to minimize power consumption. It comes with a short

Vibrating Beacon, Changer Without Dimmer And With Photocell, Series: VBN3DMPX6400, Voltage: 24, Connection Type: NPT 1.25 Inch, Current Rating: 27 amps, Hz: 60 HZ, Mounting Type: Base Mounted

The VBN3DMPX6400 is a 1/2 NPT single-stage 24V solenoid valve designed for commercial and industrial applications. It has a square flange, barbed connections and a built-in check valve. Since it's completely potted in epoxy, it is highly resistant to abrasives, oils and greases, as well as atmospheric corrosion and most chemicals.