Honeywell VBN3DNPXC000 "1.25"" FLT/2PO NSR 24V W/AUX

"1.25"" FLT/2PO NSR 24V W/AUX

The VBN3DNPXC000 is a 1.25"" inch X 3/4"" inch deep X 0.63"" inch centerline model, fixed neutral pressure switch with 24 VDC auxiliary contact output (NAO-HONEYWELL).

The VBN3DNPXC000 with 1.25" nozzle and 2 point option is a great addition to any multi-function tool or air test kit.

The VBN3DNPXC000 is a fixed-mount back box. It has a build in 24V Auxiliary power supply for standalone, DNP 2-way operation. The VBN3DNPXC000 is also compatible with Honeywell's 3D Neo and 2G networked paging system using the appropriate Duplex Network Module ( HNC5024, HNC4024, HNC3008)

To activate the auxiliary relay, operate with compatible 2-stage thermostat.

The thermostat allows you to adjust the temperature and the auxiliary relay provides added safety. The outdoor reset is designed to send a low current back through the actuator, signal a fault and operate an outside light. It is compatible with Honeywell's range of Z-Wave enabled products. Works with any Honeywell HRV or VRF system or other manufacturers providing 24 Vac.

The VBN3DNPXA000 is a 24 Volt Non-supervised Fan coil Unit, it is Hard Wired Five (5) Button keypad and has Aux Power option. Unit includes a Pilot Light (24VAC/DC), Water Resistant loop, Post type Plug-in Transformer, Lockable louver, and can be used for both heating and cooling applications. This unit requires a zero (0) degree filter signal.

The VBN3DNPXC000 Back-Up Horn is a single tone wooden boat horn with a versatile design. It has aluminum electrical terminals and mounting holes that rotate through 360 degrees and 90 degrees, respectively. The horn can be rotated up and down or left to right, and it can be moved forward and backward by removing the horn from the mounting pad. The wail or two toned modes are often used as a back-up alarm in boats to warn other vessels when backing up in reverse, but it can also simply be used as a location warning device.