Honeywell VBN3GRPXA300 "2.5"" 3W 74Cv 2PO SR 24V W/AUX

"2.5"" 3W 74Cv 2PO SR 24V W/AUX

The VBN3GRPXA300 is a 2.5" Single-Phase, 3W, 600V maximum voltage auxiliary contactor with a current rating of 74Cv at 24V DC.

Auxiliary contact module for Honeywell VISTA panels, 3 W/PO output, varistor surge protection, 24 VDC. Switch rating: 1 A-600 Vac/50/60 Hz, 20 A-240 Vac/10 sec."

The VBN3GRPXA300 Honeywell FAN is a 2.5" Inlet, 24 Volt Outdoor Wall Ceiling Fan with Auxiliary Switch and 3-Speed Slide Switches. This is one of the most popular ceiling fans on the market today, designed to enhance both commercial and residential applications.

The VBN3GRPXA300 is a miniature circuit breaker of 2.5"" Series with Class 10kA at 600VAC and 3W. It has 100% rated thermal pulsation and 20% overload current protection. The VBN3GRPXA300 has maintainer and warning trip function at the rated current of the tripping device, provide for higher reliability than the conventional thermal-magnetic circuit breaker while maintaining the same ratings."

Auxiliary exhaust blower kit with muff and thermostat for use with select 2.5" V-belt scroll compressors. NOTE: For proper installation and effective performance of the auxiliary blower kit, the original motor/compressor must not be blocked or insulated in any way. A minimum clearance of 1/2" is required between the air inlet side of the blower housing and all other obstructions such as heat sinks.

Whatever the weather, this versatile and reliable inverter generator will be there for you when it counts. With 2.7 hours of run time at 50% load, this generator is also the perfect solution for daily operations at hotels, hospitals and airports. This model comes with an auxiliary outlet allowing you to connect tools and other auxiliary equipment directly to the generator."

The new Honeywell 2.5" WIRESTAR II Series Bipolar Nickel Oxide (NIXIE) Display has a vertical viewing angle of over 180 degrees and adjustable brightness control. The low-profile display utilizes Nix-Oxide technology, and is constructed with a stainless steel bezel and base for high-humidity applications, as well as a rugged polyurethane glass lens with hardened scratch-resistant coating, for long term durability.