Honeywell VP513A1188 , Inc. 5/8 in. OD 1/2 in. Nominal, Pneumatic Water Valve, 2.5 Cv

"1/2"" 5/8 O.D.Flare 2.5cv3-7#"

This Pneumatic Water Valve is suitable for shut off applications in water lines. The valve has a 1/2"" 5/8 O.D. Flare, and a flare to pipe coupling of 14mm. The body material is Brass. The valve features Iron disc occluding element and steel ball poppet.

A 1/2" Male Flare x 5/8" OD PVC Water Valve designed for a 1-1/4" NPT Pipe. Unique Tri-Clover design. For use in applications requiring a positive shutoff at the end of the system or pump and line isolation during service and installation.

The Direct-Connect Pneumatic Water Valve is a replacement part for use with Instant Hot and electronic instant hot water heaters. It provides an internal, non-adjustable air valve that controls the flow of water to the storage tank. The 5/8 inch nominal size, 5/8 inch trade size valve has 2.5 cv and 3-7 psig pressure rating. Manufactured from brass for durability, this direct connect pneumatic heat valve features a captive pull cord to make repairs easy.

Pneumatic water valves are used to automatically control hot water flow in residential and light commercial applications. The valves range from 1/2" to 4" diameters, and can be mounted in any position. The valve is actuated with a 3/8 inch diameter air-inlet nipple and includes an assortment of mounting hardware to fit most standard valve installations.

Our water valves offer .2 psi leakage on the low side and .6 psi leak on the high side. They are weatherproof and electrical actuators of up to 2 hp can be easily retrofitted to them. Note: Please consult factory for ease of retrofit.

Get what you want, when you want it. Our Pneumatic Water Control Valves allow faucet and fixture operation at the touch of a button, with less maintenance and downtime. For use with several types of interior decorative items in residential and commercial applications.

Designed for inlet applications to deliver a fixed volume of water where small 1/4 turn Pneumatic valves cannot be used, or where the use of a Burst Pressure (BPR) requirement is required.