Honeywell VP526A1068 , Inc. 1/2 in. OD x 3/8 in. Nominal Three-Way High Pressure Water Valve, 1.0 Cv

"3/8""3W W/1/2""FLR

This 3/8""3-way Solenoid Valve initiates water flow when actuated by the 2-stage non-latching pilot.

Industrial-grade reliability requires few moving parts and only two unique materials to provide a 3/8"" nominal conduit connection in potable, chemical and liquid applications. The Viton™ flexible diaphragm withstands temperature changes from 0F to 250F, preventing burst at extreme temperatures. The integral seat is formed from reinforced Buna-N rubber, and provides outstanding sealing over the Rated Service Pressure Range. The 1/2"" FNPT inlet remains square for easy assembly to I.D. protected pipe.

VP526A1068 / VPP-115 / MVP-115  Features 1/2 in. O.D. CIP connections and 3/8 in. IPS female threaded connections.  Made of durable brass, with zinc plating for extra protection against corrosion.

The 1/2"" Three Way High Pressure Water Valve, Mitre Flange, .040 orifice is a ?clamp-on? style used for supply lines and as a main shut-off valve. This model comes with a 1/2"" male BSPP (G) inlet and 1/2"" female JIC (F) outlet and garden hose adapter. It has an orifice size of .040" and is rated for 0.5 to 2.0 Cv at 60 psi, has an internal seat diameter of 0.315", maximum working pressure of 150 psi

1/2" GHT BALL VALVE, 3/4" FLANGED UPSTREAM (MALE) AND WATER OUT (FEMALE), 1 THREADS PER INCH, HIGH PRESSURE, CONICAL BALL STYLE PLUNGER, 1.0 Cv

Honeywell 1/2" NPT three-way valves are designed for hot water service up to and including 150 deg. F. Swing check is standard, as is the high pressure disc assembly and brass bonnet with nylon nut. These 1/2" valves have a flow range of 0-10 gpm at 80 psi and, with an appropriate Test cocks (not included), can be tested down to -20 psig. Note: Refer to catalog drawings for additional information regarding flow rates. Also see catalog number VP548A1068 in catalog number VP5 = =54A series files."

The three-way water-control valve is designed for use with a high-pressure soap or detergent line. The cap assembly can be removed and attached to the valve body by tightening the set screw, making service easy. The valve has two positions: open (vent) and closed (closed).