Honeywell VR8205H1003 Single Stage, 24 Vac, Slow Opening, Direct Ignition Gas Valve. 1/2 x 1/2". Set 3.5" WC

SLOW OPEN NAT. GAS VALVE

The Honeywell VR8205H1003 is a Single Stage, 24 Vac, Slow Opening, Direct Ignition, Gas Valve. 1/2 x 1/2".. It is constructed of brass and has a minimum pressure of two Argon. Its flow class is 3.5 inches WC with 10 PSIG spool pressure. Openings are either normally open or normally closed, depending upon which way it is installed. It is set at 3.5 inches WC with 15 PSI backpressure shutting it off.

The VR8205H1003 from Honeywell is a single stage, 24 Vac, slow-opening gas valve. This gas valve features low lead solder and an stainless steel 1/2" gas connection with 1/2" male NPT thread. It is rated to open 0.05-0.15 in H2O or 7-12 psi.

The Honeywell (R) VR8205H1003 single stage, 24 VAC, slow opening, direct ignition gas valve operates with a water column (WC) of 3.5 inches. This gas valve has the same basic construction as the thermostatic valves on the VR series. It features a thermoplastic body, an internal temperature limiting device and a pilot burner to prevent backflow of product.

The Honeywell VR8205H Series Natural Gas Valve is constructed from durable brass, for long lasting durability and dependability. This 2-way valve has a 1/2 Inch inlet and outlet, its single stage, with a manual override.

This gas valve is for use on natural gas supply lines with a nominal pressure of 3.5" WC-300 PSI.

Precise temperature control required for the best output from a natural gas or propane burner.

The VR8205H1003 is a 2-position gas valve. The valve is a 3/4" O D x 1/2" NPT, direct spark ignition, single stage (demand) gas valve, with roller pilot and trip lever. It has a FSR-3 body and a medium pilot operated by a LPS-4 pilot actuator. Comes with attached tailpiece and two position gas regulator. Three way shutoff ball valves are also available for safety shutoff purposes on the outlet side of this gas valve.